Cargando...
Doing business in Spain? Interempresas Media is the key
  1. Madera
  2. Encoladoras

Venta de encoladoras de segunda mano, encoladoras nuev@s y de ocasión, de las principales marcas (Homag, Scm, Biesse, Osama, Osama encoladoras, etc.). Encuentre su oferta y contacte con el vendedor.
resultados

Marca
fin
Modelo
País
Francia
Año
Descripción
Technical characteristics Double gluing Superior gluingInferior gluing Cleaning brush Useful width: 1300 mm Maximum passing height: 120 mm Power and Motors Pluging: Three-phased Overall dimensions
EUR

Marca
biesse
Modelo
País
Francia
Año
Descripción
Technical characteristicsPanel width : 240 mm to 1200 mmPanel length : 240 mm to 3000 mmPanel thickness : 10 mm to 60 mmBand thickness : 0,3 mm to 3 mmPin inner axis : 500 mm ENTRY / EXIT :Transfer realised with special chains covered in stainless long lasting rubberEntry pivoting guides adjustable depending on panel typeClosing device on above pressor to assure the pressing of the panel against the pinsDelaying device in entry for optimization of different width panel dimensions Single part rigid structural longitudinal chassisADVANCE CHAIN :Continuous speed tuning from 10 to 40 m/min by INVERTER CN direct numerical commandThe stop pins are automatically adjusted in height by CN and can have : height/thickness 12- 18-23 mm from the chain levelChain pin inner axis 500 mmBELT PRESSORSOUNDPROOF CABINSAll machining groups inside the machine are surrounded by soundproof material Internal lightingCN command placed at entry of the machine, fixed chassis sideNUMERICAL CONTROLVideo interfacePositioning axis controlChain advance speed tuningPressor height adjusting depending on panel thickness Automatic adjustment of band changing and band charger Moulding list managementSequenced motor startupPossibility of connection to a barcode readerModule NC410MILLING GROUPTimed pneumatical anti shard action for transversal milling Tool rotation speed : 6000 rpmMotor power : 5.8 kWTool Ø : 200 mmDOUBLE SUPERPOSED SPLINTERSSimultaneous displacement for thickness adjustment and independent adjustment vertical and horizontalCast iron bearing structureTool speed rotation : 6000 rpmMotor power : 5.8 kW Tool Ø : 205 to 250 mmEXTENSION MACHINE to 3200 mmAUTOMATIC CENTRAL SUPPORT 10.5This device allows support of parts that due to their dimensions or thickness can subdue central bendingFully automatic activationGLUING GROUP SP3Straight bands in resin, melamine, ABS, PVC, PP EVA basis thermoplastic glueIndependent Teflon covered changeable glue tank Glue level sensor inside the tankGlue input roller speed synchronized with the chain advance Breveted pre fusion deviceGlue granule container (8kg)Band presence detection deviceAutomatic band changing procedure6 POSITION MOBILE BAND CHARGERSEND CUTTINGEnd cutting unit for edge thicknesses up to 3 mmDevice for quick removal in strokeAutomatic exclusion of the unit when the motors are stoppedSpeed : 12000 rpmPanel projection : 35 mmEdge thickness : 0.3 to 3 mmPanel thickness : 10 to 60 mmInterval between 2 consecutive panels : 350 mmWHOLESALE TRIMMING UNIT2 superimposed motors with horizontal axisAutomatic pneumatic exclusion of the groupSpeed : 12000 rpmMotor power : 1.3 + 1.3 kwPanel thickness : 10 to 60 mmTool diameter : 80 mmANGLE TRIMMING GROUPThe adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stopsThe in-line stops are automatically selected by the controlUse on the MULTIPROFIL tool group to change profile/shape without replacing the toolTools are equipped with 20° chamfer and 1.5-2-3 mm radiusSpeed : 12000 rpmMotor power : 0.65 + 0.65 kwPanel thickness : 10 to 60 mmTOP / BOTTOM ROUNDING GROUPRounding copier for the upper and lower stops of the panel with oscillating movement for the continuation of the panelQuick release system of the motor-holder groupsAutomatic exclusion of the tool with stopped motorsTool rotation speed : 12000 rpmMotor power : 0.3 kwEdge thickness : 0.3 to 3 mmRadius with concave profile : 40 mmMinimum distance between the tail of one panel and the head of the next (at 20m/min) : 500 mmUNIVERSAL MILLING MACHINEFor the execution of profiles, grooves and rebates on the edge and on the plane of the panels with pneumatic interventionMotor tiltable from 0 to 90° manuallyAutomatic exclusion group from the control panelSpeed : 12000 rpmMotor power : 5 kwTool diameter : 125 mmDOUBLE UNIVERSAL MILLING MACHINEFor the execution of grooves and rebates on the edge and on the plane of the panels with pneumatic interventionThe upper motor is manually adjustable from 0 to 90°.The lower motor is fixed horizontalAutomatic exclusion of the groups from the control panel Speed : 12000 rpmMotor power : 5+5 kwTool diameter : 125 mmEDGE SCRAPING UNITFor the finishing of ABS/PVC/PP edges of high thickness with radial tools and horizontal and vertical copiersEquipped with nebulizer for tool cleaningAutomatic exclusion from the control panelTool radius: 1 to 5 mmEDGE HEATERAllows to heat the edge of the panel during the passage of the latter to reactivate the original color when using PVC materialsGLUE SCRAPING UNITEDGE-CONTROL DEVICEElectronic-mechanical device for the control of the edge length by means of shears at 40m/minMinimum length of the edge to be applied: 350 mmBAR FOR NARROW PIECES SBMinimum width of panels: 35 mmKIT FOR NARROW PIECES WITH THIN EDGESIt allows to work pieces with minimum width 70 mm, only in case of thin edge applicationMinimum panel length 400 mmPREDISPOSITION FOR INSTALLATION KIT PU GLUINGPower and Motors Pluging: Three-phased Power: 95 Kw Overall dimensions Weight: 19000 Kg ... Leer más
EUR

Marca
holzher
Modelo
País
Francia
Año
Descripción
Technical characteristicsFeeding of thin to thick edges = 0.8 to 3 mmStrips and rolls: ABS, laminates, wood, composites, etc.Edge height : 51 mm maxEdge thickness : 8 mm maxMinimum length of pieces : 350 mmPiece feeding 11m/min Composition:Edge magazine (1903)Pre-milling (1961)Cartridge gluing (1906)End cutting (1918)Form milling (1942M)Glue scraping (1929)Edge scraping (1964)Polishing (1944K)Power and Motors Pluging: Three-phased Overall dimensions Length: 5945 mm Width: 1144 mm Height: 1730 mm Weight: 1860 Kg ... Leer más
EUR

Edgebander KDF 530 C {{favorit}}

Marca
homag
Modelo
País
Francia
Año
Descripción
Technical characteristicsPart thickness : 8 to 50 mmEdge thickness: 0.4 to 8 mmProgrammable control with group indexingFeed rate 11 m/min Composition:Edge insertion deviceMilling unit (straightening)Pre-melting deviceEdge magazineEnd cutting unitMilling unit (flush)Form milling unitSurface scraping unitPolishing brushes Suction nozzles :1 x 120 mm / 3 x 60 mm / 1 x 100 mm6 bar pneumatic system Compact and complete machinePower and Motors Voltage: 400 V Pluging: Three-phased Power: 10,5 Kw Overall dimensions Length: 4860 mm Width: 900 mm Height: 1610 mm Weight: 2000 Kg ... Leer más
EUR

Edgebander KDF660 {{favorit}}

Marca
homag
Modelo
País
Francia
Año
Descripción
Technical characteristics Diamond calibrationGlue tankInfuserEnd cut unitPre-trimmingAffleurageCopying / Rounding unitBand scraper feed speed 16m / min maxmotorized pressure beammotorized entry guide adjustmentQUICK MELT gluing with pre-meltpneumatic tiltingpre-trimming for 15 mm max from 8 to 60 mmmotorized synchro trimcopying / milling shapesbuffingpre available ZHR operator return Minimum panel thickness: 8 mm Maximum panel thickness: 60mm Minimum band thickness: 0.4 mm Maximum band thickness: 12mm Power and MotorsOverall dimensions ... Leer más
EUR

Edgebander KDF670 {{favorit}}

Marca
homag
Modelo
País
Francia
Año
Descripción
Technical characteristics End cut unitBand scraper Feeding speed 20m / min maxEdge height max 65 mmCalibration, gluing with granule pre-melterEnd cut2 motorsRadial flush and chamferCopyingBand storageNC synchronized aggregatePOWER CONTROL 16 controlDigitized beam height and advance Maximum band thickness: 20mm Maximum band height: 65 mm Power and MotorsOverall dimensions Length: 6890 mm ... Leer más
EUR

Edgebander K203R {{favorit}}

Marca
scm
Modelo
País
Francia
Año
Descripción
Technical characteristics Band scraperBrushes working height 8 to 55 mmfeed speed 8m / minsong shoproller HOTMELT gluingtilting double blade end cuttrimming / copyingcorner rounder Minimum band thickness: 0.4 mm Maximum band thickness: 5mm Power and MotorsOverall dimensions
EUR

Marca
scm
Modelo
País
Francia
Año
Descripción
Technical characteristics Diamond calibrationGlue tankInfuserEnd cut unitAffleurageCopying / Rounding unitBand scraperBrushes feed speed 11m / minflush top / bottom, straight / chamfer / quarter roundend copying with probesurface scrapingprogrammable control panel with pneumatic exclusion of groupselectric room height adjustment Minimum panel thickness: 8 mm Maximum panel thickness: 60mm Power and MotorsOverall dimensions ... Leer más
EUR

Marca
homag
Modelo
País
Francia
Año
Descripción
Technical characteristics Digitized commandGlue tankEnd cut unitAffleurageBand scraper glue tank for HOTMELT glue in granules, possible use of PU glue in granules under the conditions of usetwo directions of rotation of the glue roller: direction of advance or against advancePC 16 electronic control: BRANDT control system with color graphicsmodem for remote diagnosissoundproof boothmax feed speed 14m / minpneumatic connection 6 barlighting inside the hoodmotorization of the pressure beamadjustable entry guidemotorized adjustment of the entry guidemotorized pressure zone adjustmentQUICKMELT gluing unitdressing unit 200 Hz 2 x 2.2 kW48 mm diamond router bit setchamfer / straight end cutting unit 2 x 0.35 kWblowing devicetrimming unit 2 x 0.55 kW 0-25 ° counterflowmotorized adjustment of the side probespneumatic control of the trimming unitpath-controlled blowing devicetrimming unit 2 x 0.55 kW 0-25 ° advancepath-controlled blowing devicetop and bottom form milling unitscraping unit with quick changepneumatic control for scraping 5760/57362-motor buffing unitinterface for LIGMATECH ZHR 01 / ZHR 02 / ZHR 15 Minimum panel thickness: 8 mm Maximum panel thickness: 60mm Minimum band thickness: 0.4 mm Maximum band thickness: 12mm Power and Motors Voltage: 400 V Pluging: Three-phased Power: 17 Kw Overall dimensions Length: 6860 mm ... Leer más
EUR

Marca
biesse
Modelo
País
Francia
Año
Descripción
Technical characteristicsUseful height 10 to 60 mmSold without operator feedback Touch screen Edge magazine Roller Cutter Diamond sizing Gluing unit with pre-cutter End cutting Pre-gluing Trimming Copying unit Edge scrapersGlue scraper Brush and leister Edge strips 10 mm Feed speed 12m/min Minimum band thickness: 0.4 mm Maximum band thickness: 3mm Power and Motors Pluging: Three-phased Power: 18 Kw Overall dimensions Length: 5200 mm Width: 1200 mm Height: 1600 mm Weight: 1980 Kg ... Leer más
EUR

Edgebander EB25 {{favorit}}

Marca
Modelo
País
Francia
Año
Descripción
Technical characteristicsmotorized scraperedge length cutworkpiece height max: 65 mm - min 11 mmmax temperature setting 400 ° Cfeed speed 4m / minquick settingseasy to use without compressed air for pre-glued PVC, melamine and polyesterPower and Motors Voltage: 220 V Overall dimensions
EUR

Marca
scm
Modelo
País
Francia
Año
Descripción
Technical characteristics Automatic Band insertionDiamond calibrationBand scraperGlue scraper Minimum panel thickness: 8 mm Maximum panel thickness: 50mm Minimum band thickness: 0.4 mm Maximum band thickness: 3mm Power and Motors Voltage: 400 V Overall dimensions Weight: 1428 Kg
EUR

Edgebander S215 {{favorit}}

Marca
scm
Modelo
País
Francia
Año
Descripción
Technical characteristicsfeed speed 18 m / mincalibrationTHERMOFUSIBLE glue pre-melt tanktilting end cuttrimmingradial flush / chamferscraperspolishingCN and pneumatic indexing Maximum panel thickness: 60mm Maximum band thickness: 15mm Power and MotorsOverall dimensions
EUR

Marca
homag
Modelo
País
Francia
Año
Descripción
Technical characteristics End cut unit Minimum panel thickness: 8 mm Maximum panel thickness: 50mm Minimum band thickness: 0.4 mm Maximum band thickness: 3mm Power and MotorsOverall dimensions
EUR

Edgebander KDF 530 C {{favorit}}

Marca
homag
Modelo
País
Francia
Año
Descripción
Technical characteristicsFeeding speed 11m/minComposition :Edge feeder in roll formDiamond calibrationEdge introductionCutterGluing unitOrientable end unitTrimmingScraperAngle copyingBrushProgrammable control with group indexingCompact machine - complete composition Minimum panel thickness: 8 mm Maximum panel thickness: 50mm Minimum band thickness: 0.4 mm Maximum band thickness: 8mm Power and Motors Power: 10.5 Kw Overall dimensions Length: 5000 mm Width: 1000 mm Weight: 1900 Kg ... Leer más
EUR

Marca
homag
Modelo
País
Francia
Año
Descripción
Technical characteristicsPU 15/45SWidth 450mmFeed 60m/min400V 3Ph+nLoader, belt sander width 60mm, universal sanding unit 0,75kWOut mechanizationPower and Motors Pluging: Three-phased Overall dimensions
EUR

Edgebander K203 TE {{favorit}}

Marca
scm
Modelo
País
Francia
Año
Descripción
Technical characteristicsCalibration of 2 diamond tool holdersGluing with hot melt glue trayAutomatic edge feedingPressure groupTiltable end cuttingStraight / chamfer / 1/4 round trimming Edge scrapersBrushCapacity :panel thickness 50 mmedge thickness roll 0.4 - 3 mmedge thickness strips 8 mmFeed 10m/minPower and MotorsOverall dimensions Length: 3700 mm ... Leer más
EUR

Marca
fin
Modelo
País
Francia
Año
Descripción
Technical characteristicsUseful width 300 mmVinyl glue (white)Disk output rollerIdeal for gluing piecesPanels before pressingPower and MotorsOverall dimensions
EUR

Edgebander JADE 225 {{favorit}}

Marca
biesse
Modelo
País
Francia
Año
Descripción
Technical characteristicsPanel thickness 10 to 60 mm Edge thickness 0,4 - 3 / 8 mm Minimum panel length 150 mm Calibration Gluing End cutting Trimming Rounding Radius scraper aggregate Glue scraper BrushingPower and Motors Power: 8.6 Kw Overall dimensions Weight: 1600 Kg
EUR

Edgebander K203 T-ER {{favorit}}

Marca
scm
Modelo
País
Francia
Año
Descripción
Technical characteristicsCalibrationCutter and edge feederHot melt glue trayEnd cuttingTrimmingAngle copyingScrapersBrushesPanel thickness 8-55 mmEdge thickness 8 mmFeed rate 10 m/minComplete and compact machinePower and Motors Pluging: Three-phased Overall dimensions Length: 4500 mm Width: 1300 mm Weight: 1050 Kg ... Leer más
EUR

encoladora {{favorit}}

Marca
osama encoladoras
Modelo
1300
País
España
Año
Descripción
encoladora osama de 1300 mm. de anchura, con 4 rodillos, 2 superiores y 2 inferiores, con variador de velocidad para el arrastre.ce
EUR

Marca
osama technologies
Modelo
S2R
País
España
Año
Descripción
Máquina de dos rodillos. Ancho útil de trabajo: 1.300 mm.
EUR

Marca
osama technologies
Modelo
S2R
País
España
Año
Descripción
Ancho útil de trabajo: 1300 mm. Altura máxima de trabajo: 100 mm. Velocidad de avance: 18 m/min. Potencia motor: 0,5 Hp. Limpiador eléctrico. Normativa CE
EUR

Marca
osama encoladoras
Modelo
País
España
Año
Descripción
Maquina encoladora de Rodillos de cola, 4 Rodillos, anchura de 1.300mm, maquina en perfecto estado, CE.
EUR

Marca
osama
Modelo
S2R-1300
País
Alemania
Año
2021
Descripción
working width: 1300mm working height: 100 mm roller diameter: 185mm infinitely variable speed by frequency converter grooving: 12 speeds per inch Dimensiones: 2000 x 800 x 1500 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónFinal de la subasta: 20/06/2023 14:11 MEZEste artículo se vende exclusivamente por medio de un mecanismo de subasta en anuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

Marca
Modelo
País
Italia
Año
Descripción
Dimensiones: 800x900x1300 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónFinal de la subasta: 15/06/2023 9:08 MEZEste artículo se vende exclusivamente por medio de un mecanismo de subasta en anuncio en web de Surplex (más información)anuncio en web de Surplex (más información)
EUR

Marca
osama
Modelo
S2 R1300
País
Hungría
Año
2008
Descripción
S/N: 20355 Working width:1300 mm Working height:100 mm Spreading roller diam.:185 mm Motor power: 0,37 kW, 380 V, 50 Hz Height of working surface: 800 mm Dimensiones: 2000x900x1500 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónEste artículo se vende exclusivamente por medio de un mecanismo de subasta en anuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

Marca
jusan
Modelo
País
España
Año
Descripción
Bomba deposito cola.
950 EUR

Categorías (epígrafes)

    Marcas

      Países

        Precio

        Años

        Seleccione los productos sobre los que desea información y pulse este botón