New units of dosage of Liquid Silicones
Elmet has presented the TOP 1000 dosing pump, driven in the pneumatic form, combining high reliability in intensive productions with an attractive price. It is ideal for the mass production of high quality parts and is suitable both for use of cans of 20 liters and 200 litre drums. Applying a 1: 1 mixing ratio, the pumping capacity is more than enough to supply flows up to 2.5 litres per minute, depending on the viscosity. In parallel you can append dyes, with adjustable dosing at three levels.
An extended version, the system of dosage TOP 3000, which in addition has a patented system of regulation in closed cycle is constructed with the same space on floor of only to 1,250 mm x 1,050 mm. This system allows a precision of constant and controlled dosing of two containers of LSR with a mixed 1: 1 ratio, which is regulated through software. At the same time, it allows for a synchronized emptying of both drums. This ensures that, when you change a drum, the remaining material in its interior is of a maximum 1 per cent, thus making the most raw. The electronics of the system controls and registers all the relevant data of the process, such as the fill level of the material, the remaining processing time, pressures, volumes and dosage of color. The control system with programmable memory (SPS), sensitive sensors and the Levellers of rapid reaction complete a control system of closed cycle that guarantees a high quality of production sustained over time. Process data required for the assurance and the quality of documentation are stored on an ongoing basis and can be downloaded in a register of memory with USB connection. Thinking of the needs of customers around the world, the system has eight default languages of service, and at the request of the customer can integrár be you additional languages. To achieve uninterrupted production, the system of dosage TOP 3000 can be installed also in tandem.
To add colorants, Elmet offers combinations with its lines of dosage of color. They are composed of a valve of dosing, that can optionally be combined with a container under pressure of 0.7 litres with controller of pressure and regulator, a pressure of 4 litres container or a bomb of color of 20 litres, both with agitator and controller level.
From dosing systems which save costs, the palette of products and services of Elmet extends up to fully automated injection tools and high-precision, that make up the core business of the company, through electronically controllable needle for cold channel valves, and peripheral equipment such as valves contra-flujo, extended nozzles, adapters of meshes, etc. Upon request, Elmet combines its products with customers injection machines to build completely equipped and tested, production cells with components designed to operate together in an optimal way. In addition, at the request of the customer, the company is in the condition of producing unique pieces and small series, should be required to make the pieces of sample available quickly.