Higher yields on extruders new single of Battenfeld-Cincinnati
Highlights of the new series of extrusion machines is its huge production capacity with low temperatures of the melt. Thus, machines, available in five sizes with spindles of 45, 60, 75, 90 and 120 mm in diameter, are suitable for the extrusion of high-performance tubes of HDPE and PP-b. "Numerous extrusion machines in this new series are already working with excellent results in terms of production," explained from the company.
Energy saving
In the configuration of the new series 40 (d) has taken the knowledge of both companies: what is giving good results, such as the construction of the party and the layout of the processing with five zones of heating unitIt has remained. What is new is the addition of a chain of transmission of very high capacity, working with high performance. Optimized processing unit and the new chain of transmission reduce consumption of energy by approximately 15%. Also new is the configuration of the unit of processing. A food slotted in the form of spiral zone is responsible for the optimal reception of the material and its transportation, ensuring a constant and high production. The slotted spiral make it possible that friction is minimal in the transportation of grain.
The change in the geometry of the spindle, with optimized mixture and shear elements, undertakes a careful processing of mass cast at low temperature. Finally, the new combinations of heating/cooling guarantee appropriate temperature of the cylinder, and thus the high effectiveness of the extruder.
With a homogeneity of the mass cast especially high, the extrusion machines of the new series achieve such high yields that, compared with a conventional extruder of 30 D, allow the use of a model of lower extruder.
Finally, the series 40 D is controlled through the known and intuitive system of control BMCtouch. Comfortable handling makes possible, even in very complex lines, a simple control. Thanks to a surface of free configuration screen, each operator can adjust the control unit to your individual needs.