Neue Herbold, manufacturer of windmills to measure for crushing and pulverization of plastic materials.
Neue Herbold offers a wide range of crushers mills with engines from 11 kW to 200 kW and mouths of entry from 300 mm to 2000 mm in width for productions up to 8,000 kg/h. The main Division could be in the series LM, mills for grinding of plastic parts not very heavy, for example injected parts, little wall thickness tubes (e.g. coarrugados) films and other products with a weight not exceeding 10 kg, and the series SM, mill of great strength allowing the grinding of large weight pieces such as mazacotes, tubes of high thickness, etc. In both series should be noted that they have different models of rotor and different designs of hoppers, even changing the layout of the blades in the rotor with the purpose of providing customer tailored solutions for your specific application. Neue Herbold Mills always distributed their blades in double slope (the blades of the rotor are inclined and opposite to the fixed blades), which guarantees a court more effective causing a lower wear of the blades, less noise in the grinding process and a more uniform grain size.
All models are also bearings outside the House of crushing which prevents contamination of bushings and at the same time from oil pollution of dust from the camera in very significant savings of time in the process of galgado of them.
Micronizadores/sprayers ZM of Neue Herbold should always feed on pelletising obtaining a product in the form of powder or crushed material, the ability of these will depend on the grain size of food as well as the particle size desired final powder depending on the distance between discs. This team is of special interest for the transformers that feed your machine on the basis of product in powder form.