Control and measurement in the process of production of plastic articles
In large part, the reaction of a plastic product to various conditions and combinations of loading, temperature and cycle of use depends on the behavior of the material with which it was manufactured. The properties of effort, cedencia tension, viscosity at certain temperature or resistance are crucial in the final quality of the plastic. This fact makes it necessary to have a few teams to ensure accurate measurements of each variable. For example the meter of thickness of material PCE-TG100, supplied by PCE Group Iberian, determines in seconds the thickness of various materials, including plastics. This simple handling apparatus operates with ultrasound, which gives a high-accuracy measurement. It comes preset factory with five different sound speeds for different materials.
The thickness of metals, glass and plastics and other homogeneous materials can be measured with him.
Thickness measurements of material on a plastic plate
To measure the resistance of the plastic you can use any of the force of the PCE-FM series, to determine efforts of traction and compression in different ranges (from 5 Kg to 100 Kg).
These force are controlled by microprocessor with fast and accurate reading of traction and compression. They can be used along with an optional software and the data cable to transmit the values of measurement of force to a PC or laptop. The smallest interval of transmission of data to the software is s 2. There is also a test post that is ideal for the measurement of traction and compression in the quality control and laboratory experiments.
In this way it tries to facilitate the process of quality control of plastic, with the latest technology so that the end result is a product of highest caliber.