Interempresas.net

es en ca
Plastics
  1. eMagazine Plastics
  2. Moulds for plastics

RSS Add to Google

"Moulds for plastics" articles
(full list)

Evolution of the world-wide trade of moulds and matrices (2008-2012)

07/03/2014
Josep Font, general secretary of Ascamm and of Feamm
Picture of Evolution of the world-wide trade of moulds and matrices (2008-2012)
This article has been elaborated from inform them product/country of the ICEX corresponding to the products: useful to stuff, stamp or punzonar, code TARIC 82 07 30, plastic moulds and rubber (injection or compressesion), code TARIC 84 80 71 and moulds for metals or carbides (injection or compressesion), code TARIC 84 80 41. [+]

Moldeo By blown with printers 3D

04/11/2013
Nadav Seals, Application Salts Manager, Jay Beversdoarf and Dr. Lior Zonder, Application Engineers of Stratasys Ltd.
Picture of Moldeo By blown with printers 3D
The moldeo by blown is the process of manufacture that realizar pieces of plastic hollow, as for example bottles and other containers. The manufacture of these articles is fast and economic however the prototypes in the first phase of design, tend to be slow and costly. By this reason, the companies of moldeo by blown have avoided the realisation of the prototypes. We see the advantages of the moldeo by blown form in 3D... [+]

Evolution of the world-wide trade of moulds and matrices (2008-2011) in reference to Spain

24/03/2013
Josep Font, Secretary General of Ascamm and of Feamm
Picture of Evolution of the world-wide trade of moulds and matrices (2008-2011) in reference to Spain
This article has been elaborated from inform them product/country of the ICEX corresponding to the products: useful to stuff, stamp or punzonar, code TARIC 82 07 30, plastic moulds and rubber (injection or compressesion), code TARIC 84 80 71 and moulds for metals or carbides (injection or compressesion), code TARIC 84 80 41. [+]

The bet of Hasco by the innovation

26/09/2012
Editorial Interempresas
Picture of The bet of Hasco by the innovation
The manufacturer of normalised and specialist in hot channel of Lüdenscheid HASCO, presents the last technologies for the increase of the efficiency and productivity in the construction of tools and moulds in the areas Mould Base Division and Hot Runner Division. [+]

The Spanish industry of moulds shows symptoms of recovery

15/06/2012
Josep Font, general secretary of the Ascamm and Feamm
Picture of The Spanish industry of moulds shows symptoms of recovery
If we take into account the data published by Anaip and the own collected by Feamm, the sector of moulds of the Spanish industry is not going through his best moments. In Europe the situation neither is good, but perhaps presents better data... [+]

Portugal moldea his future: from the design until the product

25/10/2011
Javier García
Picture of Portugal moldea his future: from the design until the product
Portugal is one of the world-wide powers in the manufacture of moulds, mainly for the injection of plastics. The sector, of big tradition in the regions of Marinha Big and Oliveira of Azeméis, where are concentrated the majority of the companies of this industry, is one of the bets of future of the country... [+]

Two magnetic systems electropermanentes, stars in the stand of DTC Technology in Equiplast 2011

19/10/2011
Redaccion Interempresas
Picture of Two magnetic systems electropermanentes, stars in the stand of DTC Technology in Equiplast 2011
 The company DTC Technology, exclusive representative for the Spanish market of manufacturers of systems of subjection for lathes and milling machines of CN of the world, as well as of systems of subjection electropermanentes for the manipulation of ferric loads and for the tie up of moulds and troquel, will show two new  technologies in the fair: Milltec and Pressestec... [+]

Pakto offers the manufacture from a 3D model

16/12/2010
Drafting Interempresas
Picture of Pakto offers the manufacture from a 3D model
Pakto, a division of the company Imvolca, is taking relevance in the world of metal sintering technology. For several years is engaged in project management and provides various services such as the realization of projects of parts in thermoplastic and their prototypes of moulds for injection, carrying out testing and development of moulds and pieces and carrying out injection of parts on a mass-production basis... [+]

Experts predict a bright future for the additive techniques

14/12/2010
Drafting Interempresas
Picture of Experts predict a bright future for the additive techniques
Additive manufacturing techniques were featured on the Euromold fair which was held in Frankfurt between the 1st and 4th of December and received 55.301 visitors, of which, 40.9% were foreigners. Under the slogan 'e-producción for everyone', professionals in the manufacturing of tools and moulds, and the design and development of products, they exchanged experiences... [+]

Thermoforming and injection into a single mold

02/12/2010
Drafting Interempresas
Picture of Thermoforming and injection into a single mold
Many of the recent innovations in the field of the transformation of plastics are coming from the hand of the builders of moulds. Georg Kaufmann Formenbau (Busslingen, Switzerland) has developed a mold for organic plate which in the last edition of the K introduced integrated teams of Krauss Maffei. [+]

The industry of Portuguese moulds accompanies to his customers in all the chain of production

05/12/2013
Esther Güell
Picture of The industry of Portuguese moulds accompanies to his customers in all the chain of production
The Portuguese moulds are archiconocidos in the international field by his quality, precision, reliability and capacity of innovation. After this success find crowd of companies, of distinct sizes and capacities but that, however, are joined by a common aim: improve even more the ‘mark' Portuguese and show in front of his customers like a ‘partner' in all the chain of value. They do not manufacture only moulds, offer integral solutions... [+]

GLP systems GmbH Saves time in the phase of development through Proto Labs

06/06/2013
Editorial Interempresas
Picture of GLP systems GmbH Saves time in the phase of development through Proto Labs
The ex-president of BMW, Eberhard von Kuenheim, said in the years 90: “The big will not devour to the small, but the fast will advance to the slow”. The executive director of GLP systems GmbH, the Dr. Robert Hecht, appointment cheerfully to Kuenheim because, following his lemma, he is about to to turn into the world-wide specialist in automation of laboratory... [+]

Portugal adapts to the new challenges

25/10/2012
Javier García
Picture of Portugal adapts  to the new challenges
Portugal organised a year more his Week of the Moulds, an international meeting point in which the companies, the professionals and the main actors of the industry moldista put in common and shared experiences. Universal plastics / Interempresas had occasion to attend to the evento and to form part of a comitiva international that visited some of the companies moldistas more representative of Marinha Big and Oliveira of Azeméis... [+]

The profitability stars the days of Arburg

06/07/2012
Ibon Linacisoro
Picture of The profitability stars the days of Arburg
The past 4 July Arburg celebrated in the installations of the Gipuzkoan company Olaker some days, in collaboration with Hasco and BASF, with the profitability like protagonist. In addition to the theoretical presentations realised , already in the workshop, practical demonstrations of injection of a piece with and without engine with variator and with different materials... [+]

Hasco Invests 30 million euros in a new centre of production

27/04/2012
Editorial Interempresas
Picture of Hasco Invests 30 million euros in a new centre of production
Hasco is carrying out in these moments in his headquarters of Lüdenscheid, Germany, a big project of construction, perhaps the most important of his history: it will inaugurate the next month of June one of the centres of production more modern for the manufacture of normalised for moulds in Europe. [+]

The discovery of the front of material melted

24/10/2011
Christopherus Bader and Simon Christian Zeller. Priamus AG (Distributed in Spain by RobotPlus, S.L.)
Picture of The discovery of the front of material melted
The technology of the sensors. The process of moldeo by injection can be considered like a temporary sequence of processes of conmutación very clear-cut. Both sequences, the one of the controller of the machine and the related with the moldeo, such as the opening and closing of the channels of feeding, are controlled by the aforementioned processes of conmutación... [+]

Insertions of hybrid construction with cooling of closed contour

13/01/2011
Concept Laser
Picture of Insertions of hybrid construction with cooling of closed contour
The cores and cavities and the molds require constant maintenance to be at its maximum level operational and productive. Manufacturers of molds and plastics processors opting more and more often by working with suppliers of flexible and optimal services from a technical point of view... [+]

Through conformales channels temperature control

14/12/2010
Siegfried Mayer, Victor Paluzie, Agustin Niavas and José Greses. EOS
Picture of Through conformales channels temperature control
Eosint M systems produce solid pieces of metal through the merger by laser applied metal powder layer to layer. Thus is created automatically the final geometry on the basis of the data in three-dimensional CAD. This method is called sintering or melting laser direct Metal (Direct Metal Laser Sintering). Depending on the material used and the parameters of the applied process, this method allows a wide range of properties of piece... [+]

New materials and technologies for the achievement of high-definition models

02/12/2010
Anna Hoiss, Director of product development (Europe) of DSM Somos
Picture of New materials and technologies for the achievement of high-definition models
New scanning techniques and manufacture by addition of layers are being used in various industries. In this case it is a solution to achieve a reproduction of the sculpture of Athena of Myron, which will finally be chocolate, not plastic, as we are accustomed in this magazine. But the process to get the high definition model is interesting. [+]

Nova fridge: the industrial cooling of the future, at the K 2010

06/10/2010
Drafting Interempresas
Picture of Nova fridge: the industrial cooling of the future, at the K 2010
Frigo Nova presents on the occasion of the K of Düseldorf its renewed range of refrigeration equipment and atemperadores of mold, among which outstands the water cooler of the series Sigma, "a single machine in the sector and revolutionary by its conception and benefits". [+]
Front Company
Newsletter
I accept the
usage and registration terms

Featured business
Highlighted links
  • Biobased materials