Plastics

(menú)

Companies

Classifieds

Catalogs

Videos

Magazines ▾

Plásticos Universales

eMagazines

⌂
eMagazine Plastics
Three new thermoforming machines (01/01/1995)

This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Tres nuevas máquinas de termoconformado

Three new thermoforming machines

The Milan Rigo group has presented these new machines for different fields of application. The first is a machine for forming and cutting Speedy of automatic cycle, which operates simultaneously both operations at the same station, producing 14,400 pieces/hour with a cast of eight cavities. The second is a Monostazion 2R hydraulic without shaft, suitable for processing plastic sheets with thicknesses up to about 8 mm, with load and download manual, being only the conformed by vacuum. Finally, the basic line is a machine to produce liners (coatings) internally for refrigerator. Equipped with a single station of global warming, it can produce 60 pieces/hour of high impact PS.

	Aserm Shows the reality of the manufacture 3D Esther Güell The past 19 March celebrated in Barcelona the day ‘Design and 3D Printing: new fields of application' organised by Aserm —Spanish Association of Rapid Manufacturing— and the Museu of the Disseny of Barcelona. They assisted some 500 people interested so much in the reports like the back ‘workshop'... [+]
	Good perspectives for the termoconformado Editorial Interempresas The sector of the termoconformado is crossing good moments. Illig (Represented by Helmut Roegele), one of the big in this sector, reached a record of sales in 2011, closed 2012 with excellent results and expects to continue the tendency in 2013, to fault of definite data to finals of November... [+]
	Moldeo By blown with printers 3D Nadav Seals, Application Salts Manager, Jay Beversdoarf and Dr. Lior Zonder, Application Engineers of Stratasys Ltd. The moldeo by blown is the process of manufacture that realizar pieces of plastic hollow, as for example bottles and other containers. The manufacture of these articles is fast and economic however the prototypes in the first phase of design, tend to be slow and costly... [+]
	New formulations with natural loads for the manufacture of pieces by rotomoldeo Aiju (Technological Institute of the Toy) In the present work pretends develop new formulations of plastic materials by means of the incorporation of natural residue (shell of almond) so as to obtain a material composed with new physical properties, mechanical and ecological, apt for the process of rotomoldeo... [+]
	Pallmann Bets by the agglomeration of plastics in conditions of high humidity During the manufacture and the processing of the thermoplastic, the waste are part of the production, but once manufactured, these plastics become of use cuotidiano and used for the consumption. Later we will recover these plastics used through the urban systems of collected of waste... [+]