Taegutec Presents his novelties for ranurar, tronzar and tornear
29 December 2011
Taegutec Presents the new line of brocas with interchangeable tip Drill Rush, that guarantees an excellent performance and high productivity. With an edge of cut optimised and fixation of the innovative tip, the new Drill Rush sample a remarkable performance in comparison with the brocas of existent hard metal or other brocas conventional. A mechanism of easy subjection, including a key of fixation that allows to change the tip without disassembling the broca of the machine. Besides, no only it is more efficient that the screw of subjection, but also more profitable and requires less time of set up.
The Drill Rush has other advantages. The body is recubierto with PVD, what allows greater life of the tool whereas the lips polishings allow an evacuation of the most fluent shaving and a high precision in the taladrado. The new quality TT9080 recubierta of multicapas, with a special treatment of the tips of taladrado that adds resistance to the tool.
The Drill Rush builds for maximizar the efficiency in the costs, a range of tips of different diameters of taladrado and several geometries of edge of cut used in the same body of the tool to save the costs of production in general. The new broca of Taegutec is available in diameters of 10 to 19,9 mm (in increases of 0,1), whereas the body of the broca comes in 3xD, 5xD, and in 8xD.
Quad Rush: ranurar, tronzar and tornear in side and chanflanar
Taegutec Enters a new line of product —Quad Rush—, adapted for ranurar, tronzar and tornear in side and chanflanar. This new line includes plaquitas with 4 edges of court that allow an excellent performance and repetitividad. The new plaquita has a rompevirutas very positive that allows to mechanise in multiple applications providing an excellent control of shaving, being a tool of economic and effective court for any application of trozado and ranurado. The Quad Rush guarantees an excellent quality of surface in ranurado.
The system of subjection, designed with 3 points of contact and a lateral screw type torx, offers a very precise lace and a durability in the mechanised.
Between his main characteristic stand out the 4 edges of cut for a better economy and a conformador positive type J for an excellent control of shaving and a surface of finishing of high quality for ranurar. Account likewise with 3 points of contact far of the edges of court and a position of the plaquita very precise when it mounts . If the edge breaks , can use any remaining edge. The accommodations protect the edges that do not use of the shavings during the process of mechanised.
Includes besides key torx only and screw to fix the plaquita. The plaquita is interchangeable from both sides of the portaherramientas and supposes a big advantage for the lathes Swiss type. It incorporates lateral screws type torx, that ensure a rigid subjection in the portaherramientas.
Apply 2 screws of adjust different:
- Carries left hand (L): screw right hand (R)
- Carries right hand (R): screw left hand (L)
The quality Gold Rush TT9080 is the last technology with layers multinano to improve the quality of the surface and the life of the tool.