Komet Exhibits all his potential in special tools

The tangential Komet plates are extremely resistant and can be used universally in tools for milling, drilling and bore. Provided that the machine is adequate capacity, these works of high resistance between interchangeable plates allow the highest level of productivity.

With the increase in the use of special multistage tools, the variety of tools and tool changes (frequent and increasing the cycle time) tend to be reduced.

Stepped with tangential plates Komet tools provide a great solution to the client. For example, insert BK6115 quality is able to offer a variation between the base substrate and coating CVD.

Today, a wide range of pieces, for example, additional cylinders to compressor, i.e., covers, side plates, cameras of machines, etc. are machined using tangential plates, special tools from the most varied designs. Each of the tangential interchangeable plates has 8 phyla and mounted in different positions in fixed seating of the tool (that can optimally support shear forces). The plates can be used universally, and allow the machining of corners, or achaflanado and bore. The sinter, positive rompevirutas of the plates and the plate seat designed with the same positivity has the effect of producing a soft cut.

The new Komet Kub Centron Powerline is based in the head of taladrado Centron Komet Kub which has been tested during a lot of years. These tools are especially designed to guarantee the proportion length/diameter. In comparison with the classical, of an only edge Komet KUB Centron, with the new Powerline Komet Group has developed tools of double edge for the segment of deep hole (until 9xD). The most significant change is in the plaquitas interchangeable. The plaquita interchangeable Quatron with four edges of cut is the only tool of his class.

In function of the diameter, each head of taladrado Centron Komet Kub Powerline is instrumented with two, four or six of these plaquitas. The adjust to the diameter of the tool is possible thanks to a combination of different sizes of plaquita, and with more precision through an adjust of the diameter of the tip of centred. Dividing the cut between the two edges of cut, achieves learning of shaving very short, even in the materials that are extremely difficult to mechanise. The geometries of cutting widely testadas ensure that the process of taladrado was stable. The maximum useful life reaches thanks to the most modern materials and coatings of tools of cutting. In this sense, the existent variants of plaquitas interchangeable Quatron allow to mechanise in all type of materials.

An additional profit of the Komet Kub Centron Powerline is that they are not necessary the elements of guide.

The system Komet KomTronic axis-Or is a solution of tool mecatrónica that it can be exchanged automatically from the loaders of tools in machining centres. These can program freely and allow complex operations of turning, what saves the purchase of special tools and allows to answer quickly to the changes in the geometry.

This system allows to obtain the most adjusted tolerances, the most difficult geometries in exotic materials. Also it is of particular use in the manufacture of demanding products for the industry automotriz, the aerospace industry, mechanical engineering, the medical industry or industry of generation of power, in the small and average series of production.

The Bluetooth technology in the systems of precision bore

KOMET MicroKom BluFlex is an innovative tool system where komet Group technicians have integrated for the first time the innovative Bluetooth technology. Modern wireless networks make the mandrinos are consistent with a more comfortable and flexible manner. What originally was presented as a study in the EMO 2009 has reached series production.

The Komet MicroKom BluFlex heads can be used with a display unit and an adjustment key. And thanks to the Bluetooth enabled a pure data communication, a power supply problem is resolved with replaceable batteries or batteries in the display unit and key to adjustment.