Flow Waterjet shows the powerful combination of hiperpresión (6,500 bar) and 3D water cutting
July 19, 2011
Due to the emergence of these composite materials Flow bet in its long-term strategy to develop machinery and systems that could be cut, drill, recantear and milling all materials with great precision and without prejudicing their mechanical properties.
"Once that Flow has demonstrated its unique ability to work with any material without damaging it, it was necessary to offer more". With the passage of time, demanded cut faster, more accurately, and also respecting the materials. And that can only be achieved with bombs capable of working at a higher pressure, cutting heads that have 3D capabilities, and dispose of the software and programs that address the movements of the entire system to achieve perfect pieces on the first attempt. Anything else is wasted effort, time, dedication, and money.
Flow offers its clients machines such as Mach 4, a range of machines with pumps working at 6,500 bar, 94,000 psi: work under this pressure ensures the maximum cutting speed. Any intensificadora pump to work under pressure only will succeed in producing more expensive parts.
On the other hand, Flow also presents its biggest advance in the world of water, the XD Dynamic cutting. In the company, aware of the inherent errors caused by a non-rigid tool (water jet), invented in 2001 by water dynamic, Dynamic Waterjet cutting, in order to correct the taper and the delay of the beam. This advance provided greater cutting speed getting better grades. Today Flow offers already in Spain its patented 3D Dynamic Waterjet XD technology, allowing any company to cut with high precision complex parts in three dimensions, also removing the taper, which means to obtain any piece 2D or 3D as quickly and precisely as possible and in any material, consisting only of a court and without the need for further completion work.
But as it is not always necessary to have the maximum technology but the machine that allows to perform as desired, and their depreciation is simple, visitors of EMO will see live cut his family of machines Mach 2. Simple and with the quality of Flow, is its most traditional technology, adapting their capacities and components to the present.
