Available more sizes of the range Tendo And Compact
17 March 2014
Given the competitive price and the excellent performance of the range of tool holders hidr-áulicos Tendo And Compact,
This portaherramienta is manufactured exclusively in the central factories of Schunk in Lauffen. The innovation consists in moving the advantages of the systems of tool holders hydraulics to processes of big volume of mechanised. In dry conditions, this economic tool holders of precision bears pairs of until 900 Nm with a diameter of 20 mm. For diameters of 32 mm, this tool holders is able to transmit pairs of until 2.000 Nm. In comparison with tool holders hydraulics traditional, this pair is 60% higher. The casquillos of expansion and the internal camera of oil, absorb the vibrations that appear during the operations of mechanised as well as the beaks of load, stabilising the tool when this works on the surface of the material.
The tool holders Tendo And Compact guarantees an eccentricity of less than 0,003 mm with a length of tie up of 2,5 x D, with a degree of stability of G 2,5 to 25.000 rpm with goring HSK. The combination of eccentricity and absorption of vibrations warns the wear of the tool of cut, increases the durability of the same and avoids the marked of the surface of the piece. Besides, the design of the tool holders increases the useful life of the husillo and of the threads of the machine. Any of the tool holders hydraulics of Schunk need of costly additional peripheral elements. The fast change of tool realizar easily by means of a key type Allen. The tool holders Tendo And Compact is available for the gorings HSK-To50, HSK-To63, HSK-To100, SK40, SK50, JIS-BT30, JIS-BT40, JIS-BT50 and SK50.
