News Info News

This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Las mordazas de cuña manuales de precisión cumplen con los requisitos de Nadcap
The mordazas of coins manual 2716-030 can reach maximum loads of 250 kN

The mordazas of coin manual of precision fulfil with the requirements of Nadcap

Editorial Interempresas29/11/2013

The new series of mordazas of coin manual developed by Instron combines reliability with big precision and alignment of samples repetible. This characteristic does them able to fulfil with the strict requirements Nadcap AC7122-1 (for materials no metallic) and AC7101 (for metals), commonly used in the industry aerospacial.

Whereas the mordazas of coin Instron 2716-028 are designed for a nominal strength of 100 kN, the mordazas of coins 2716-030 can reach maximum loads of 250 kN. This peculiarity turns them into the ideal election for the demanding tests of tension of a big variety of materials like metals, polymers reinforced with fragile fibres of high resistance and other rigid materials.

The new mordazas of coin manual developed by Instron offer an alignment repetible and of high precision of samples of metal or composites...
The new mordazas of coin manual developed by Instron offer an alignment repetible and of high precision of samples of metal or composites, that fulfils with the requirements of NADCAP. Photo: Instron.

His enclosed design avoids the penetration of dirt and of fragments of the materials of proof. The symmetrical closing of the mordazas has achieved through an adjustable mango of safe and easy ratchet to use, and the strength of closing applies only when it has begun the proof. To measure that advances the essay, the action of coin them allows that the strength of the mordazas increase in proportion by force applied. The wands of advance allow that the mordazas are used inside a camera of temperature Instron, providing a wide range of temperatures of proof, between the -80 °C and the +250 °C, without need to change pieces or lubricantes.

Big variety of accessories expands the area of application of the new mordazas of coins

These include adapters ‘piggy back' and elements to mount probetas of distinct types of essays (for example compressesion and flexión), which can join to the mordazas without need to disassemble them. In addition to this, there is available mordazas with different superficial structures, that can be changed in seconds without the utilisation of special tools. The helps of centred ‘Specime Centering Stops', available of optional way, contribute an exact positioning of the samples.

Combined with a thermal sensors camera Instron available optionally (left)...
Combined with a thermal sensors camera Instron available optionally (left), the new mordazas of coins developed allow temperatures of essay from the 80°C until the +250º; the optional adapters ‘piggy back' with platens of compressesion allow to fit a wide range of adapters between the mordazas, for example to do proofs of compressesion after impact (CAI) (right). Photo: Instron.

Comments on article / news piece

New comment

Warning

Los comentarios son la opinión de los usuarios y no la del portal. No se admiten comentarios insultantes, racistas o contrarios a las leyes vigentes. No se publicarán comentarios que no tengan relación con la noticia/artículo, o que no cumplan con el Aviso legal y la Política de Protección de Datos.

Advertencias Legales e Información básica sobre Protección de Datos Personales:
Responsable del Tratamiento de sus datos Personales: Interempresas Media, S.L.U. Finalidades: Gestionar el contacto con Ud. Conservación: Conservaremos sus datos mientras dure la relación con Ud., seguidamente se guardarán, debidamente bloqueados. Derechos: Puede ejercer los derechos de acceso, rectificación, supresión y portabilidad y los de limitación u oposición al tratamiento, y contactar con el DPD por medio de lopd@interempresas.net. Si considera que el tratamiento no se ajusta a la normativa vigente, puede presentar una reclamación ante la AEPD.

Suscríbase a nuestra Newsletter - Ver ejemplo

Password

Select all

Autorizo el envío de newsletters y avisos informativos personalizados de interempresas.net

I authorize the sending of communications from third parties via interempresas.net

He leído y acepto el Legal notice y la Data protection policy

Responsable: Interempresas Media, S.L.U. Purpose: Subscription to our newsletter(s). User account management. Sending emails related to the same or related to similar or associated interests.Retention: for the duration of the relationship with you, or as long as necessary to carry out the specified purposesTransfer: Data may be transferred to other group companies for internal management purposes.Rights: Access, rectification, opposition, deletion, portability, limitation of processing and automated decisions: contact our DPD. If you consider that the processing does not comply with the regulations in force, you may lodge a complaint with the AEPD.More information: Data protection policy

REVISTAS

VÍDEOS DESTACADOS

  • VOLLMER VHybrid 260

    VOLLMER VHybrid 260

  • MonoThread – SFSE y SGF: Roscado con precisión

    MonoThread – SFSE y SGF: Roscado con precisión

TOP PRODUCTS

NEWSLETTERS

  • Newsletter Metal

    17/09/2024

  • Newsletter Metal

    16/09/2024

Highlighted links

Aspromec - Asociación de profesionales para la competitividad del mecanizadoNebext - Next Business Exhibitions, S.L. - Advanced Machine ToolsFundación FicobaIndustry LIVEEasyfairs Iberia - MetalMadrid

Latest news

Featured companies

OPINIÓN

OTRAS SECCIONES

Services