Henkel Revolutionises the Traditional Technicians of Sealed
12 September 2013
The selladores of anaerobic threads, are products of an alone component that base in the absence of air and the contact with a metal for the cured. The absence of air achieves thanks to the fact that the sellador displaces the air of the spaces between the threads. This type of sellador is clean and easy to apply, can use in the diameters of thread more common, protects the threads against the corrosion and, unlike other systems of sealed, also fixed the union and is resistant to the aflojamiento by vibration. The products do not displace by the pressesure, neither contract and the excesses do not obstruct other components; besides, any excess material can delete easily with a cloth.
Commercialise distinct specific degrees of selladores anaerobic for his use with drinkable water, gas, GLP and fuels for heating. In the practice, with an alone product could resolve the majority of applications of sealed, so much domestic like industrial, in which they take part metallic threads.
The selladores of anaerobic threads are ideal for threads of any metal, usually ironinging, brass, copper or stainless steel. They seal independently of the pair of tighten and until the limit of pressesure of the pipe, providing a pair of desmontaje controlled for the back maintenance. As it has described previously, they cure in absence of air and by means of the contact with metals when they confine inside the threads.
After the cured, these selladores resist the majority of liquids and industrial gases. Besides thanks to his low level of toxicity exist products recognised for his use in the alimentary industry. The temperatures of service in general are comprised between -55 °C and +150 °C, but a brief exhibition to temperatures higher does not prejudice the sealed. They exist other available options if the circumstances require a sellador that have to face up to temperatures that continuously surpass this maximum.
The thread sellador of pipes Loctite 55, is a simple technology that seals threaded unions of fast way, clean and economic. It does not need any special learning to use the product and attain a union to proof of escapes of instantaneous way. The only that it has to do the plumber is to wrap the thread sellador around the male thread, apply the number recommended of corresponding turns to the size of the thread and mount.
Another big profit of this method is that it allows to slacken the unions to range curves, elbows or measurers without risk of escapes. The thread sellador of pipes Loctite 55 is Recognised for his application in cold or hot water, gas, GLP and air compressesed, but no for liquid fuels. For the sealed of liquid fuels employ selladores anaerobic like Loctite 577.