News Info News

This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Una alternativa productiva al fresado de ranuras
The heads of slotted front CoroBore 825 SL offer new levels of productivity

A productive alternative to routing grooves

Drafting Interempresas12/07/2013

Workshops seeking a competitive benefit in slotted front applications will find what they need in the new heads of slotted front CoroBore 825 SL specialist at Sandvik Coromantcutting tools. This axial adjustment for slotted front rotary tool offers a productive alternative to milling of slots for those who work or provide services in sectors such as the pumps and valves, hydraulic industry and the pulp and paper industry.

the new heads of slotted front CoroBore 825 SL, Sandvik Coromant, uses a standard SL32 lama and CoroCut inserts of 1 and 2 cutting edges, while it offers the supply of refrigerant inside to ensure optimized control of chip. This, combined with high levels of rigidity, allows the application of higher cutting data.

The range of slotted front CoroBore 825 SL with Coromant Capto
The range of slotted front CoroBore 825 SL with Coromant Capto.

Removal of swarf is an important factor in any machining operation, but it is essential when it comes to slotting because chips have a greater tendency to become trapped inside the slot and be re-mecanizadas. As a result, the refrigerant inside supplied directly to the cutting edge can be very beneficial.

Slotted front CoroBore 825 SL heads provide radial adjustment precision for the pre-reglaje and are available for diameters from 1275 to 47 mm. For smaller diameters (47-150 mm) C6 and C8, adapters are available for larger diameters (> 150 mm) apply a special slotted front with CoroBore XL head.

First choice plate geometries are - CM for small tip radii (< 0.2 mm) or - TF to greater tip radii (> 0.2 mm); and the initial recommended value for the feed rate is 0.15 mm/Rev. However, if you require slots with a width of greater tolerance, geometry - GF is the preferred choice. Here, the initial recommended value for the speed of advance is of around 0.10 mm/Rev.

At least now there is a high productivity alternative to milling of slots. Axial machining operations of slotted front for applications such as the production of o-rings has never before been as easy as with slotted front CoroBore 825 SL technology. For applications with different forms, such as V-grooves, there are also available Tailor Made solutions.

The range of slotted front Corobore 825 SL tipped CoroCut 1-2 cutting edges
The range of slotted front Corobore 825 SL tipped CoroCut 1-2 cutting edges.

Related Companies or Entities

Sandvik Coromant Ibérica, S.A.

Comments on article / news piece

New comment

Warning

Los comentarios son la opinión de los usuarios y no la del portal. No se admiten comentarios insultantes, racistas o contrarios a las leyes vigentes. No se publicarán comentarios que no tengan relación con la noticia/artículo, o que no cumplan con el Aviso legal y la Política de Protección de Datos.

Advertencias Legales e Información básica sobre Protección de Datos Personales:
Responsable del Tratamiento de sus datos Personales: Interempresas Media, S.L.U. Finalidades: Gestionar el contacto con Ud. Conservación: Conservaremos sus datos mientras dure la relación con Ud., seguidamente se guardarán, debidamente bloqueados. Derechos: Puede ejercer los derechos de acceso, rectificación, supresión y portabilidad y los de limitación u oposición al tratamiento, y contactar con el DPD por medio de lopd@interempresas.net. Si considera que el tratamiento no se ajusta a la normativa vigente, puede presentar una reclamación ante la AEPD.

Suscríbase a nuestra Newsletter - Ver ejemplo

Password

Select all

Autorizo el envío de newsletters y avisos informativos personalizados de interempresas.net

I authorize the sending of communications from third parties via interempresas.net

He leído y acepto el Legal notice y la Data protection policy

Responsable: Interempresas Media, S.L.U. Purpose: Subscription to our newsletter(s). User account management. Sending emails related to the same or related to similar or associated interests.Retention: for the duration of the relationship with you, or as long as necessary to carry out the specified purposesTransfer: Data may be transferred to other group companies for internal management purposes.Rights: Access, rectification, opposition, deletion, portability, limitation of processing and automated decisions: contact our DPD. If you consider that the processing does not comply with the regulations in force, you may lodge a complaint with the AEPD.More information: Data protection policy

REVISTAS

VÍDEOS DESTACADOS

  • VOLLMER VHybrid 260

    VOLLMER VHybrid 260

  • MonoThread – SFSE y SGF: Roscado con precisión

    MonoThread – SFSE y SGF: Roscado con precisión

TOP PRODUCTS

NEWSLETTERS

  • Newsletter Metal

    17/09/2024

  • Newsletter Metal

    16/09/2024

Highlighted links

Industry LIVEFundación FicobaNebext - Next Business Exhibitions, S.L. - Advanced Machine ToolsEasyfairs Iberia - MetalMadridAspromec - Asociación de profesionales para la competitividad del mecanizado

Latest news

Featured companies

OPINIÓN

OTRAS SECCIONES

Services