This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Fresas con recubrimiento Smart Miracle, alto rendimiento en materiales difíciles de cortar
MMC, to the avant-garde of the design of the new technologies
Milling cutters with coating Smart Miracle, high performance in difficult materials to cut
Editorial Interempresas03/01/2013
The milling cutters Smart Miracle, of Mitsubishi Materials Corporation, (MMC), have been subjected to treatment with a coating of the group (To the, Cr)N recently developed, that provides a resistance a lot of elder to the wear. The surface of the coating has received a treatment of alisamiento that offers better surfaces mechanised, lower resistance to the cut and better evacuation of shavings.
This is the next generation of milling cutters recubiertas, with a long useful life for the mechanised of stainless steel and other difficult materials to cut.
Surface ZERO-μ
With the surface ZERO-μ, the edge of cut keeps his sharp. Whereas with the previous technologies the edge went wearing out, the surface ZERO-μ it offers softness and sharp, in addition to a long useful life.
Size of cut improved
In addition to employing a conventional cut of two phases, the inferior part of the cut has rounded to avoid the concentration of tensions and improve the resistance to the break. The big size of his rompevirutas help to improve the evacuation of shavings.
The new milling cutters Smart Miracle already are available. In the initial launching include the following types:
- VQMHV: 4 lips, length of half cutting with variable propeller of 37 and 40 degrees.
- VQMHVRB: 4 lips, length of half radius with a variable propeller of 37 to 40 degrees.
- VQMHZV: 3 lips, length of half cutting, for ranurado with a variable propeller of 43,5, 45 and 46,5 degrees.
Related Companies or Entities
Mitsubishi Materials España, S.A.
