Intermaher in the 2004 BIEMH
The model Variaxis 630-5M has capacity to work in 5 simultaneous axles. His structure of portico confers him an extraordinary robustness and precision. It has of inner refrigeration so much in the cabezal to mill as in the 3 husillos main. With speeds of positioning of 50 mts/min, 12.000 rpm, 30 HP and cambiador of two pallets (palet of 500) is adapted for the mechanised in series of prismatic pieces and to work in 5 simultaneous axles in sectors like the aeronautical sector component manufacturing sector component manufacturing, being a very versatile machine.
The new model HCN 6000 is a centre of mechanised horizontal with palet of 500 and the routes of a machine of palet of 630. It has of a cabezal of very high pair with a big capacity of start of shaving. His system of inner refrigeration so much in the cabezal to mill as in the 3 husillos main allows him keep an excellent precision in work continued. Besides it is a very productive machine with speeds of positioning of 60 mts/min.
The centre of turning Integrex 200 III ST allows to mechanise complex pieces that require turning and milling in an only tie up. It combines in an only machine the provision of a centre of turning with two towers and two cabezales and the ones of a centre of mechanised of 5 axles. The machine of the fair admits a maximum diameter of cut of 660 mm and a length of 1.016 mm. His cabezal of tornear is of 30 HP and the one to mill of 20\1HP\2 Likewise has of a second cabezal and inferior tower.
The vertical lathe IVS 200 is thought for productions in big series. It stands out especially his big rapidity, with speeds of positioning in X of 110 mts/min. The exposed machine in the fair will work of individual form with his corresponding system of load / downloads automatic. But it is also feasible his work in groups of 2 machines for first and second process, with systems of load and automatic download and station volteadora intermediate. The maximum diameter of cut of this model is of 180 mm.
To finalise present two new lathing centres of the known range Nexus of Mazak. The model QT Nexus 350M voltea 750 mm, has of 40 HP in the cabezal of tornear and of 10\1HP\2in the motorised tool. To his big capacity of start of shaving aúna a big rapidity with speeds of positioning until 30mts.Min.
The model QT Nexus 250 MS voltea 675 mm and has of a second cabezal of tornear to finish the piece in second operations. With 35 hp in the cabezal main, 7,5 hp in the motorised tool and speeds of positioning in fast until 33 mts/min aúna robustness and productivity. Both machines include in his standard configuration the conversational programming language Mazatrol of Mazak.