Email marketing en Interempresas

Interempresas.net

MetalWorking
 
  1. eMagazine MetalWorking
  2. The thread forming machines star the stand of Gamor in BIEMH 2012   (10/05/2012)

This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Las roscadoras protagonizan el stand de Gamor en BIEMH 2012
The signature shows also his harps and the products of tie up of Bison

The thread forming machines star the stand of Gamor in BIEMH 2012

10 May 2012

Gamor is specialised in catering industrial solutions to the small and medium enterprise. With two divisions of business, a devoted to machinery and another to accessories, are precisely these the protagonists of the stand that the company has in BIEMH, in the pavilion 2, stand B30/C31.
Editorial Interempresas

Like this, the visitors can see exposed different models of thread forming machines hydraulics like the MTC-M24, a model with cabezal vertical and capacity of M4 to M24. During the days of the fair this roscadora will realise demonstrations roscando steels to the carbon and aluminiums with metric of M3, M6, M10, M20, and M24, in manual and with programmable automaton.

Another exposed model is the roscadora hydraulics with cabezal multiposición MTC-M39, with capacity of M2 to M39. During the fair will realise demonstrations with her roscando Stainless steels and to the carbon with metric of M3, M6, M10, M20, and M36, in vertical position and horizontal degrees.

Also the roscadora hydraulics RHG-M45, with cabezal vertical, with capacity of M2 to M45, will realise demonstrations roscando Stainless steels and to the carbon with metric of M3, M6, M10, M20, and M45, in manual and with programmable automaton.

foto
The thread forming machines hydraulics of Gamor will realise demonstrations during the fair.

New roscadora Vitoria M130

treats of a new roscadora hydraulics with cabezal vertical, with capacity of M2 to M130, that during the fair will be also realising demonstrations, in this case roscando Stainless steels and to the carbon with metric of M3, M6, M10, M20, M36, M72 (With the new male DC-CHARPILOZ), M80 and M130, in manual and with programmable automaton.

foto
Gamor Exposes the new roscadora hydraulics with cabezal vertical, with capacity of M2 to M130.

Thread forming machines Pneumatics

Inside this range, the signature exposes in the stand the models:

  • GN08: roscadora pneumatics with cabezal multiposición, capacity M2 to M8 and engine to 700 rpm
  • GN12: roscadora pneumatics with cabezal multiposición, capacity M3 to M12 and engine to 400 rpm
  • GN16: roscadora pneumatics with cabezal multiposición, capacity M3 to M16 and engine to 300 rpm
  • GN20: roscadora pneumatics with cabezal multiposición, capacity M4 to M20 and engine to 150/400 rpm
  • GN24: roscadora pneumatics with cabezal multiposición, capacity M5 to M24 and engine to 70/220 rpm
foto

New roscadora of sobremesa

Gamor presents in BIEMH a world-wide novelty for the threaded simple and economic of tubes and axles, so much in external thread by terraja like interior by male. Of M3 to M16, of M3 to M20 and of M4 to M24.

Harps for all type of dishes

Gamor, manufacturer of all type of harps for lathe, and leading company by variety and own designs, exposes soft harps, special soft harps, hard harps, special hard harps and derivative, adaptable to all the marks of mechanical dishes, hydraulics and tyres. So much national like import. A technical adviser to the visitors during the fair.

foto
The exposed harps by Gamor adapt to all the marks of mechanical dishes, hydraulics and tyres.

Products of tie up Bison

Bison, European specialist in the manufacture of manual dishes, exposes through his representative Gamor a big variety of systems of tie up of pieces. Like this, it shows a big variety of universal dishes, combined, independent, of zip (high manual pressesure), in 2, 3, 4 and 6 harps from 60 to 1.500 mm of diameter, in addition to Hydraulics dishes in 2, 3 and 4 harps, of 135 to 800 mm of diameter.

Other products Bison that they can see in the fair are:

  • Points Bison: the greater and more reliable range of points giratorios, copiadores, for tubes, of interchangeable tip, type mushroom, and dishes point, for manual lathes and CNC.
  • Divisores Bison: divisores, counterpoints, tables divisoras, angular tables and fixed bases and giratorias, for the placing of manual dishes.
  • Systems VDI Bison
  • Screws of bank Bison
  • Mordazas Bison
foto
Gamor Exposes also the products of tie up of his represented Bison.

Related Companies or Entities

Related articles

Picture of Systems of pulverización of the hand of Spraying Systems in the BIEMH 2014

Systems of pulverización of the hand of Spraying Systems in the BIEMH 2014

Editorial Interempresas
Spraying Systems is pioneering world-wide in systems of pulverización for the industry. Between his manufactured stand out the systems of lubrication AutoJet... [+]
Picture of Power and speed combined in a fresadora vertical

Power and speed combined in a fresadora vertical

Editorial Interempresas
Manufactured by the company Jobs of Piacenza, JomaX is a family of big centres of milling horizontal and vertical of high power... [+]
Picture of Intelligent toolings for the mechanical manufacture

Intelligent toolings for the mechanical manufacture

Oscar Gonzalo of IK4-Tekniker
The European project Intefix, led by IK4-Tekniker and funded with 7,5 M of euros by the VII Program Mark of the European Union, has like aim improve the productivity of the processes of mechanised and reinforce the industry of the products of high value added. [+]
Picture of Sandvik Coromant Presents his versatile strawberry for chamfers

Sandvik Coromant Presents his versatile strawberry for chamfers

Editorial Interempresas
With the end to surpass the problem to need multiple specific milling cutters in the cambiador of tools of a centre of mechanised to create different chamfers in the component, Sandvik Coromant now offers CoroMill 495... [+]
Front Company
Newsletter
I accept the
usage and registration terms

Highlighted links
  • Emaf 19 - 22 noviembre 2014