This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at
La broca de plaquitas C900 de WNT amplía su gama de diámetrosWNT Has developed this broca of high advance so that it use exactly the same plaquita in the inner accommodation that in the outside
The broca of plaquitas C900 of WNT expands his range of diameters
Editorial Interempresas05/02/2014
The range of broaches with plaquitas interchangeable of high performance C900 of WNT expands in diameters, in concrete in the long of 3xD, 4xD and 5xD. Like this, from now, the range begins in Ø 14 mm for all the long and arrives until Ø 63 mm in the case of the one of 3xD, and until 54 mm and 41 mm for the long of 4xD and 5xD, respectively.
The High Feed Drill C900 offers a big performance, even in the long greater, thanks to the design of the body and to the seat of the plaquitas that create a base that maximiza the process of hygiene and the advance, even in depths of 5 times the diameter. The design of the body of the broca works in conjunction with the geometry of the plaquita, that gives maximum flow of shaving. WNT Has developed the broca of high advance C900 so that it use exactly the same plaquita in the inner accommodation that in the outside. This reduces the costs of stock and manufacture of the users and simplifies the setting, since the operario does not have to identify the correct plate for each position. The universal quality of the hard metal comes to simplify even more his use, since it covers all the applications of taladrado.
When doing use of an alone design, an alone quality of hard metal and a geometry, WNT is helping to reduce the costs of manufacture without having impact in the productivity. Each plaquita characterises for having four edges of cutting and be manufactured in quality CCN 1430 with coating PVD, what provides him the optimum combination of tenacity and resistance required for the processes of taladrado. This combination awards to the C900 High Feed Drill, good performance in the taladrado and high hygiene of the process, even under difficult conditions of taladrado. It works very well in applications such like taladros uneven, bent or in convex surfaces, as well as in pieces with holes crossed, cords of welding and operations of taladrado in chain.