Haulotte Presents in Conexpo his last launchings

The living room Conexpo-With/Agg is a meeting ineludible for professionals of the construction in the 2014. Organised each three years in The Vegas, this exhibition will take place this year of the 4 to 8 March in The Vegas Convention Center. Haulotte Group, specialist in equipment of elevation of people and loads, looks forward to to offer to his customers and partners a warm welcome in his stand to exchange opinions, communicate his strategic bets, and show his experience, when showing a wide range of products.

Haulotte Group has more than 120 years of experience, and an only aim: satisfy to the customers, offering a technically innovative team to improve the hygiene, the comfort, the ergonomics and the productivity. To attain this, Haulotte Group is investing in equipment of production, what guarantees the development on a long-term basis of his commercial network, and the increase of the I + D with the end to fulfil better the expectations of the market.

The commercial fairs like Conexpo-With/Agg, are a moment ideal to enter innovative equipment and show his commitment with the satisfaction of the customer with the launching of the telescopic platform HT67 RTJ (HT23 RTJ) in the market of North America, with characteristics stood out.

- The best performance of his class.

-Better zone of work: To all the levels, the new HT23 RTJ beats records with a height of work of 22,5 m and a horizontal scope of 18,3 m (1 metre above the standards of the sector). The option of dual load, offers a capacity of elevation above 450 kg.

-Greater rapidity in elevation: 56 seconds are sufficient to reach the maximum height, increasing to the double the productivity in this segment.

-Movements entirely proportional and simultaneous.

Also will show in the stand of Haulotte Group all these products:

- Platform of big height: it HAS130 JRT (HAS41 PX-NT)

Inside the platforms of big height, the platform articulated, HAS41 PX-NT has the best capacity of manoeuvre of the market, with the most compact chassis of the market, the radius of twist narrower and the distance between axles shorter. It has an excellent performance thanks to the maximum scope of 19,80 m and to the 3 simultaneous movements and proportional with the area of work no restricted. The operario has a total feeling of hygiene on HAS it41 PX-NT and the machine is easy to keep.

- Arm articulated: it HAS51 JRT (HAS18 PX)

So much in the positions of work and of transport, HAS it18 PX is very compact and allows an easier access to the zones congestionadas. The continuous rotation of the turret milling machines 360º, the abatimiento vertical of the pendular and the 180° of rotation of the basket, offer greater manoeuvrability in any surroundings of work. 4 wheels motrices and guidelines with simultaneous controls, 40 cm in the distance to the floor and a system of blockade of the hydraulics differential, give an exceptional performance all terrain with capacity of rise of until 50%. This ease of driving allows an easy access to the demanding conditions of terrain and difficult areas of work.

-Tijera Diesel Compact 2668 RT (C12DX)

Of compact design, instrumented with control of proportionate controls, does of this schemes particularly maniobrable. With a radius of external twist of 3,5 metres, allows him access to zones of work of difficult access. The maximum speed of 5,5km/h and the capacity of driving in high position, offer a considerable saving of time of work.

-Scissors electricas: Optimum 1930 And (Optimum 8) & Compact 3947 And (Compact 14)

The Optimum 1930 And (Optimum 8) is designed for all the uses in the industrial surroundings: extremely compact (2 m of height replegada and 0,76 metres of width), big autonomy, a distance to the floor of 8 cm allowing an easier manoeuvrability was and inside the buildings.

With the Compact 3947 And (Compact 14), Haulotte Group is the first company to world-wide level, in covering this segment of the market: electrical scissors of 14 compact metres and light. With a width of 1,20 metres and rails replegables, the Compact 14 is very compact. Thanks to his light weight (only 3.175 kg), is easy to manoeuvre during the operations of transport.

The platform articulated has the best capacity of manoeuvre of the market.

-Topmast electrico: Star 26J (Star 10)

The model Star 10 has been conceived to answer to all the works in height of 10 m in interior. His 1,99 m of height, the width of 0,99 m in position replegada, allows them go through standard doors. Thanks to the rotation of 360° without rear scope and to his abatimiento of pendular +70° / - 70°, the topmast Star 10 is ideal to access to zones congestionadas

-Platform articulated HAS 32 CJ+ (HAS 12 CJ+)

The height replegada of 1,99 m of HAS it 12 CJ+, allows that it can happen through standard doors and offers an excellent accessibility to the most reduced spaces. With a width of 1,2 m and a radius of twist reduced, HAS 12 CJ+ is able to realizar 3 simultaneous movements: trip, twist of turret milling machines and elevation of plumin the platform. The HAS 12 CJ+ has an arm giratorio horizontal (90 / -90 °), that offers a greater flexibility to arrive to all the zones of work.

-The most popular model of the platforms remolcables

The platform remolcable 4527To has a height of 15,5 m with a maximum scope of 8,2 m that's that of articulation of 6,3 m. The automatic system and the car-nivelación hydraulics of the stabilisers, form part of the standard equipment in all the platforms remolcables Haulotte and allow the configuration and the operation in less than 30 seconds, when the four stabilisers are deployed simultaneously.