Liebherr presents its new 150 EC-B Flat-Top crane
on August 18, 2013
LiebherrHe has presented his new modular design 150 EC-B 8 Litronic Flat-Top crane. 150 EC-B crane is available in models FR.tronic and Litronic. The new 150 EC-B Litronic model stands out for its SPS control with programmable memory, whereas the model machines FR.tronic work with the conventional system of maneuver by relays.
In addition, the new Flat-Top crane has a variant of 6 tons and another 8 ton. These choices provide great flexibility when setting up machines. As a result, the new Flat-Top crane adapts optimally to the requirements of the works and the needs of customers. This concept is also interesting from the economic point of view in the rental of cranes.
The version of the 150 EC-B FR.tronic can be used optionally with or without cabin. To the crane cabin without management, the operator has a radio, which ensures a very wide radius of action and greater flexibility in the work. With a maximum load at tip of 1,700 kg and a range of 60 meters, 150 EC-B 8 Litronic crane brand guidelines in its category. The maximum load of both models - FR.tronic and Litronic - is 8,000 kg. The 150 EC B 6, 6 tons, rising 1,800 kg in tip with a range of 60 meters. Its maximum load capacity is 6,000 kg.
Flat-Top 150 EC-B for Liebherr Crane.
In all variants, the length of the pen can be between 25 and 60 meters, and can be adjusted, as required, in steps of 5 meters. This ensures the perfect adaptation of the crane to the different conditions of the works in tight spaces. In addition, all loads can travel cheaply because the two branches. In its standard version, the 150 EC-B is mounted on the proven system of Tower 120 HC and offers a height under hook over 52 meters. Also it can be mounted Tower systems 185 HC and HC 256.
According to the requirements of the work, the 150 EC-B can be mounted on stationary or mobile chassis or, if necessary, on foot of anchorage. Under hook heights vary, depending on the configuration, between 41 and 63 meters. Ease of transport and Assembly technology proven 'Connect and Work' are part of the standard features of the new Liebherr Flat-Top crane. The cabin of the 150 EC-B is available in the variants ' standard ergonomic ' and 'cabin comfort highly isolated'. Both variants are sliding to save space in transport. Comfort cab is equipped with double glazing, insulating enhanced protection and programmable thermostat. The result is a savings of over 30% compared to conventional standard booths. High-comfort cabin comes standard with heating 4000 Watt and air conditioning.
The new 150 8 EC-B Litronic only uses high performance drives with frequency inverter. Frequency of Liebherr technology offers optimum comfort and a high level of safety in all movements of cranes. Another factor that contributes to the safe operation of these cranes is the Litronic control system. Litronic crane control system, integrates the system of limitation of the time of loading (Lmb), the system of limitation of the workspace (Abb) and the system of evaluation of the data of the machine (Mda), as well as an interface to the system anti-collision (Aks). In addition, with single press of a button, the model Litronic cranes offer up to 20% more than load maximum.