Sima Participates in Bauma 2013 with new launchings

The presence of Sima in the fair Bauma 2013 has been a step more in his successful career abroad, since in the last times the company has llevar initiatives like the opening of a new logistical centre in Nuremberg (Germany) and the launching of an on-line shop in United Kingdom, among others international projects.

Now, in Bauma 2013, Sima has had the opportunity to present novelties that have incorporated recently to his catalogue and that stand out by his efficiency and his provision.

Is the case of the new family of cortadoras Mekano. So much the Dakar MK45 Mekano like the Dakar 400 Mekano are highly productive and can cut until 650 mm of long. The Dakar 400 Mekano offers the advantage added, and in this differentiates of the rest of the family, to reach a cut of 125 mm of high, since it can mount disks of 350 and 400 mm of diameter.

Both have regulation of height and length of cutting. But the Dakar MK45 Mekano presents a novelty in front of the previous Dakar Mekano, since it has of angle of cut of 90º or 45º that confers to the machine a total adaptability to the hour to realise the cut. It is able to mount disks of diameter 300 and 350 mm, reaching a height of maximum cutting of 100 mm.

His configuration Mekano, thanks to which are easily removable, and the reduced dimensions of his packaging, allow abaratar the costs of transport since they can carry five machines in an alone pallet.

Finally, 80% of the components of both cortadoras have stainless properties, quality that lengthens his useful life of work. Also his body of aluminium and the tray of water of steel galvanised turn them into light machines.

Regarding the novelties in paving, Sima presented the models Earns 40 and Earns 50 Mekano, Earns 30 and Earns 35 PRO, and Falcon 95. It Earns it 40 and it Earns it 50 Mekano so only differentiate in the capacity or diameter of the disk of diamond. They are light and easy machines to use in which they can mount disks of diamond of 350, 400, 450 and 500 mm. His design allows that his maintenance have seen reduced turning them into machines very efficient. It fits to stand out that it Earns it Mekano is the first machine of the market that does not adopt a negative angle when short, allowing a greater depth of cutting and that the trip was 100% linear and there is not desaprovechamiento.

Like novelties, stand out a system of elevation for the rise and the descent of the cut by means of an amortiguador of gas that does not require maintenance and a rear axis regulable, that allows to approach more the line of cut to kerbs or walls and that allows sortear obstacles that could damage the disk. Also his rear wheels of big diameter of rubber avoid that the machine atasque with the possible obstacles. The threads of the wheels are protected by tapacubos of plastic that prevent the entrance of dirt and water, delaying the tasks of maintenance and lengthening the life of said threads.

Regarding his transmission Poly V reduces the patinamiento and allows an elder grip and a lower maintenance. His new system of tightened by means of roller does that the operation of tightened do not last more than five minutes, and no the 32 that would last without this system.

Also Earns it 30 and Earns it 35 Pro include this type of transmission, that reduces in 70% the number of times of tightened and of replacement of belt, increases the efficiency of the work and reduces the time of the review in 80%. Both models only differentiate in the diameter of the disk and in the power. These cortadoras of floor characterise for being those that more depth of cut reach of the market and by his revolutionary design, that minimises the maintenance and therefore the cost and turns them into machines very profitable.

In the fair could see Earns it 35 Pro, that admits disks of 350 and 400 mm. It offers advantages like the low cost of maintenance of the threads axis-disk (that it has reduced in 90% since it does not do lacking to disassemble at all to grease them), the tapacubos that protect the threads to avoid that between water or dirt and a revolutionary system of elevation through an amortiguador pneumatics with blockade in extension and compressesion. Besides, his design allows that any one can realise the operations of maintenance.

By his part, the fratasadora Falcon 95 is employed to leave a flawless finishing in surfaces of concrete, big or small. It has a ring cromado that facilitates the desprendimiento and the cleaning of the concrete. Also it includes an embrague centífrugo cromado that offers the maximum performance to the machine; a removable arm and regulation of shovels by steering wheel lobular ergonomic and wire of steel; a system of retracción of shovels that acts like dock, facilitating the regulation of the angle of the same; and arms of shovels provistos of engrasadores to facilitate a better maintenance, between other characteristics.

Regarding the hygiene for the operario, has of stop of emergency approved by the European rule.

The new electrical cutting cutting shears CEL-42 was the novelty of the family of ferralla that Sima exhibited in Bauma 2013. The creation of this machine is the answer to the high demand of international customers from Middle East, Russia and ancient ex republics-Soviet, where is common the use of steel corrugado of 36 mm of diameter and high resistance. And it is that the new version reaches this figure in cut of wand corrugada and a cut of until 42 mm in smooth wand.

Presents multiple advantages for the operario between which stand out the accionamiento with pedal and crowbar to facilitate his use; a body monoblock in steel melted that provides a greater durability; internal mechanisms treaties térmicamente, what guarantees a greater length and a better performance of work; rectangular interchangeable blades with four faces of cutting; groups of gears bathed in oil; and ease of trip with hook and crowbar, between others.