News Info News

This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Primer sensor espectrométrico que no requiere de una fuente externa de luz
Titech Has presented in Tecma the new generation of Titech autosort 4

First sensor espectrométrico that does not require of an external source of light

Editorial Interempresas14/06/2012

14 June 2012

Titech has launched in the fair Tecma 2012 his innovative team Titech autosort 4, the new generation of the technology of classification of waste based in sensors of infrared and visible. Like novelty, the system incorporates the technology Flying Beam, that deletes the external lights, increases the precision in the separation, reduces the energetic consumption and facilitates the maintenance of the team.

After the successful launching of the new team Titech autosort 4 in the past fair Ifat Entsorga, in Munich, Titech has presented it now like novelty in the Madrilenian fair Tecma. The new system Titech autosort 4, analyses and classifies with extraordinary rapidity and precision a wide range of fractions with the highest quality and pertinent of different flows of waste (urban, industrial, electronic, ELV, commercial, etc.) being able to realise also other tasks of classification with only change the program of selection.

Titech autosort 4 showed in Tecma 2012
Titech autosort 4 showed in Tecma 2012.

In an act in front of the professional presses, responsible of the company gave details of the operation of Titech autosort 4, discovering his advantages in terms of productivity, precision and profitability and signalling especially his low energetic consumption and his simple maintenance. During the presentation did reference also to other products advanced of the company, as Titech x-tract, a separador of last generation with technology of X-rays, that identifies and separates the materials according to his atomic density. Like example, stood out the team Titech x-tract 1200, that operates successfully from does already two years in the Ecoparque of the Rioja cleaning of glass and other inert the cool organic matter that processes in the plant. Likewise, the company put to disposal of the abundant assistants information about the installation and operation in plant of this team.

Judit Jansana (First by the left), Commercial Technical Boss of Titech for Spain, Portugal and Latin America...
Judit Jansana (First by the left), Commercial Technical Boss of Titech for Spain, Portugal and Latin America, during the description realised to the journalists.
Interview to Judit Jansana, Commercial Technical Boss of Titech for Spain, Portugal and Latin America

Which are the main novelties of this team?

The new Titech autosort 4 is the first sensor espectrométrico, already was of near infrared (NIR) or in the rank of the visible (VIS), that does not require of an external source of light for his operation, since it incorporates the module of lighting in the interior of the own scanner. All this thanks to the innovative technology Flying Beam, that supposes an authentic advance then , between other advantages, contributes savings of until 70% of electrical power.

But besides, Titech autosort 4 incorporates other technical characteristics advanced, like a card of control of valves of high capacity, a unit of control more powerful (CU) and the new design of block of valves more precise and fast, that allows a precision and a purity of separation still greater with a consumption of air even more reduced

Which advantages offers the technology Flying Beam?

In addition to the reduction of the consumption of power already mentioned, with the consequent decrease of the footprint of carbon of his users, the technology Flying Beam offers a greater efficiency and reliability in the separation, since it lights with more power each point of scanned, with a more stable signal while autocalibra constantly to keep the team always to the maximum of his provision, correcting automatically the aging of the lamps.

On the other hand, the compact design of the team, without external lamps, neither need of refrigeration neither for the scanner neither for the picture, as well as his hit engineering have achieved to reduce to the minimum his pieces and components, doing that his maintenance also was minimum, saving like this in time of inactividad and hand of work.

How would quantify these savings of power and maintenance?

The new Titech autosort 4 is consuming in lighting only 110 W by metre in front of the 480 W/metre of the previous model. It is necessary to take into account that the products of the competition consume 10 times more in this same function, with what can ensure that there is an excellent improvement of results, no only in front of the main competitors but also in front of our previous generation of autosort. Regarding the costs of maintenance, calculates that with the new autosort 4 reduces the maintenance until in 66% in front of the system of Titech current, had to precisely to that it does not have external lamps.

What would say him to the waste managers interested in Titech autosort 4?

Would say them that the new Titech autosort 4 is the safest option, more reliable and more efficient of the market. Keeping the flexibility and the high provision of his previous versions, everything with the guarantee of one marks leader and safe like Titech.

Diagram on the operation of the new scanner during the classification of waste
Diagram on the operation of the new scanner during the classification of waste.

Related Companies or Entities

Tomra Sorting, S.L. - División Reciclado

Suscríbase a nuestra Newsletter - Ver ejemplo

Password

Select all

Autorizo el envío de newsletters y avisos informativos personalizados de interempresas.net

I authorize the sending of communications from third parties via interempresas.net

He leído y acepto el Legal notice y la Data protection policy

Responsable: Interempresas Media, S.L.U. Purpose: Subscription to our newsletter(s). User account management. Sending emails related to the same or related to similar or associated interests.Retention: for the duration of the relationship with you, or as long as necessary to carry out the specified purposesTransfer: Data may be transferred to other group companies for internal management purposes.Rights: Access, rectification, opposition, deletion, portability, limitation of processing and automated decisions: contact our DPD. If you consider that the processing does not comply with the regulations in force, you may lodge a complaint with the AEPD.More information: Data protection policy

REVISTAS

TOP PRODUCTS

NEWSLETTERS

  • Newsletter Urbanismo y Medio ambiente

    05/09/2024

  • Newsletter Urbanismo y Medio ambiente

    04/07/2024

Latest news

Featured companies

OPINIÓN

ENTIDADES COLABORADORAS

OTRAS SECCIONES

Services