Accurate transport of percarbonato and enzymes

To the effects of a safe storage and a reliable transport of this product, recommends a solar protection, foresee a big number of points of measurement of the temperature in the interior of the silo and in the pipes of filled, installs dry compressesed air and free of oil for the pneumatics transport and the cooled of the column of material, and use like the corresponding qualities of the product.

Also increases the mentioned speed of decomposition if it damages the envolvente of the granulated. For this reason, it is necessary to transport the percarbonato sódico by means of a system of transport extremely accurate.

The system of transport Solids Puls-Pneu of Solids system-technik fulfils this requirement without the lower problem. In the installations of accurate pneumatics transport of percarbonato sódico realizar by us (previous available references application), have reached speeds of product at the end of the pipe of inferior transport to 4 – 5 m/s in an increase of the percentage of fine of <0,1% of a maximum of 1%.

These values achieve thanks to our wide experience in the accurate pneumatics transport of products to granel with the system Puls-Pneu that characterises by the following advantages:

- Accurate transport of sensitive products thanks to the low speed of transport and to the absence of elements in rotation or movement inside the product, as well as to the minimum relative mobility of the particles of the product between himself (stable cartridges of product).

- A safe transport thanks to the use of stations relays that resupply the pipe of transport with power additional in the measure in that it result necessary.

- Possibility to start without problems, still with the tuberias full, in case interruptions of the electrical supply or of air compressesed.

- Reduced consumption of gas of transport thanks to the contribution of air regulated.

System of low maintenance with few functional components, all they accessible of direct form from the outside.

The enzymes are important components in the manufacture of the modern detergents and cleaning products. The enzyme is a biochemical catalyst that dissolves the dirt and the stains, and that in conditions of temperature and normal pressesure, provides better results in the wash.

So as to warn professional illnesses such as the allergy to the enzymes or irritations of the leather, took a series of measures in the process of manufacturing, to the equal that in the equipment used for the processed.

Nevertheless the greater improvement reached granulating the enzymes, to end to avoid of this form the exhibition of the workers to the dust of the product.

For the safe manipulation of the enzymes established in a group of international work a series of directives in virtue of which, for the pneumatics transport of the enzymes, have to take into account, among others, the following criteria:

- Speeds of transport between 2 and 10 m/s to avoid the abrasion and the destruction of the grain.

- High loads of until 50:1 (relation volume of the product / volume of air).

- Transport by cartridges to avoid the destruction of the granulated; the stable cartridges avoid the relative movement of the particles of the product between himself.

- Systems of depressesion to avoid the exit of the product even in case of perturbations.

The system Solids-Vacu-Give of the signature System-technik GmbH fulfils these directives without the lower problem thanks to the transport in empty with Bypass regulated.

To these effects to transferred the method of pneumatics transport Solids-Puls-Pneu to the technician of empty, so that the advantages of this system also find available in the system by aspiration: Transport by aspiration sure and accurate with the product, with speed reduced, feeding the pipes of transport with complementary air regulated in the measure in that it was necessary.