Technical innovations and new machinery of Claas in agricultural Fima 2010

This is one of the corresponding to the section 'Agronomic management solutions' technical novelties.

This is the automatic guided tube of unloading of a mincer of forage, which together with its automatic deflector, is able to fill a trailer of material chopped without intervention by the operator of the machine. Guided saying is done through a 3D camera and laser sensors to evaluate the volume to fill with regard to the already filled, uniformly distributing the material in the trailer. Camera is housed in the discharge tube, and the entire process is controlled through a monitor in color in the cabin.

The advantages provided by this system are the release of the driver of the tasks of handling of the discharge pipe, which the driver is concentrated in other works of the machine; increases efficiency in the filling of the trailer, so they eliminate gaps and avoids loss of the chopped material that could fall to the ground.

Another novelty of the 'Agronomic management solutions' section is the electronic service for automatic adjustment of the combine harvester based on performance, type of crop and parameters of collection (speed of advance, soil, weather, etc.). It is composed of a Cebis Mobile computer compatibility Isobus, connected in series with Cebis mainframe computer of the combine harvester.

The system gives information on the possible adjustment to be made to optimize the performance of the machine, and can the operator accept it, reject it or adjust it. If you decide to accept the default setting, the system will make the corresponding changes in the machine automatically, and will do a check of the outcome.

The main advantage provided by this system is considerable fuel savings by optimizing to maximize the performance of the machine according to the conditions of harvest to which see subject (no downtime). Thus, frees the operator go pending continuous adjustment of the machine, especially in changing situations of cultivation.

The wagons in Fima are of mixed use with Isobus control, with choice of volume of box of 38, 44 or 50 m3 (according to norm DIN), allowed technical maximum mass of 24 or 34 t (according to staffing of axes tandem or trídem) and hydraulic or pneumatic braking, with unit recogedoras-picadora and possibility of chokes rear roller.

As most notable characteristics, they have a food fund wider with a new transmission. The main advantages of these trailers are the mixed use of 'autoloader' and employment as 'conventional trailer', along with the speed of transformation of a use in another.

It is a mower dragged of 3 m or 3.40 m (depending on model) working width equipped with a bar of Court of Claas PCUT with quick change of blades through a lever, bearings of double automotive balls, and the bar profile designed to alleviate and/or remove adhesions of mud that can be created in heavy and/or wet lands.

Machine with Deutz engine of four cylinders in two versions of 80 or 100 HP and 3.6 l engine, with system of investment of fan SCS for the expulsion of the dirt of the radiators, and antiparticles air filter. The engine is placed at an angle of 90 ° to the direction of advance, where you can easily access all the items for the daily maintenance. Another advantage of this provision is the step of fresh air for cooling which is carried out by the early part of the upper part of the lateral hood; later he became for the package of radiators and engine, leaving the hot air to the rear and up.

It is a tractor with power from 100 to the 121 HP nominal power (according to 97/68 CE) with an increase of 10 HP Boost when working with PTO, with demand for hydraulic flow in groups C and D of the transmission from 6 km/h (version CIS). The DPS 4 cylinder engine, with 4.5 l of displacement, Common Rail injection system, turbo and intercooler and internal gas recirculation, does it trigger up to 500 Nm of torque.

Tractor with FPT engines 4 cylinder Turbo, with powers from 72 to 88 HP (according to 97/68 CE) and Intercooler in the two most powerful models.

CLAAS also used the event to present the range of tractors links, with engines FPT's 4-cylinder turbo, with powers from 72 to 101 HP (according to 97/68 CE) and Intercooler in 3 models available in 3 versions, more powerful: F iridosornis version (minimum outer width 1.46 m), VL version "width" viñero (minimum outer width 1.26 m) and it is version viñero (minimum outer width 1,00 m).