Bobcat Launches his new manipuladores telescopic of high range
Endowed of big improvements, the T40140 and the T40180 include a lot of new characteristics and offer in satisfied versions with the phase IIIB and IIIA. The versions of phase IIIB carry an engine diesel Deutz TCD 3.6 L4 of 75 kW (100 CV) that uses recirculation of gases of leakage (EGR) and a solution only with catalyst of oxidation diesel (DOC) to fulfil the new norms of broadcasts. Whereas the new models of phase IIIA are propulsados by the engine diesel Perkins 1104D-44TA of 75 kW (100 CV).
In the case of the manipulador telescopic T40140, his maximum capacity of elevation is of 4,1 t, with a maximum height of 13,71 m. To maximum height, his capacity of load is of 4 t, whereas the maximum scope (10,43 m), is of 1,3 t. Without load, the T40140 weighs 10,29 t and provides a strength of excavation with inclination of 12300 give.
The manipulador T40180 has a maximum capacity of elevation of 4 t and a maximum height of 17,52 m. To the maximum height, the capacity is of 2,5 t; with the maximum scope (13,7 m), is of 560 kg. Without load, the T40180 weighs 10,79 t and provides a strength of excavation of 12300 give.
Performance of load leader of the market
The new models T40140 and T40180 offer a map of load leader of his class when working on the wheels only, as the big stability of the manipuladores telescopic guarantees minimum losses in height and capacity of elevation. This translates in that the new T40140 exhibits the greater capacity of elevation of 4,1 t, whereas the T40180 presents a maximum height without the same of 16,2 m on wheels.
The hydrostatic transmission of these two manipuladores telescopic achieves 95% of efficiency, aunando big power and low consumption of fuel. Thanks to this transmission, is possible to situate the load in a point with an accuracy of millimetres. In addition to the precision, another important factor is the hygiene, especially when it is necessary to situate the loads to big heights or distances of the machine.
The exclusive system lateral trip patented by Bobcat is a characteristic that comes of series in the models T40140 and T40180 and allows big flexibility, as it ensures that it did not be to move the machine, although it was not ranged with an aperture, thanks to his lateral trip of ± 700 mm. In combination with the exclusive integrated system of nivelación of the frame, that works with independence of the main frame to correct the inclination in slopes of ± 4° on wheels and of ± 12° on stabilisers and attain like this an optimum and safe placing of the loads.
New telescopic T40180 of Bobcat.
New cabin with big comfort and visibility
With a protection ROPS/FOPS optimised, the new cabin of the manipuladores telescopic T40140 and T40180 contributes greater hygiene and visibility thanks to a leading windscreen curvo that allows to see better the loads and the implementos to some height; the greater size of the rear window also improves the vision of the backside, whereas the door of the cabin, with windows by on and underneath of the crossbar, optimises the visibility when it manoeuvres near of walls or other obstacles. In general, the new cabin has designed so that it result some surroundings of exceptional work, with a big level of comfort for the operator, and so that it reduce the fatigue and improve the hygiene and the performance in the work.
From the comfortable seat with mechanical or pneumatics suspension, the operator enjoys of an ergonomic disposal of the controls of the machine, all at hand; between them there is a new button of advance and course backwards (FNR) in the joystick, a new digital screen, a steering wheel regulable and an integrated solution of circulation of air.
Greater control and hygiene
The control FNR of the joystick, that premièred in the manipuladores telescopic TL470 and TL470HF of 7 m, guarantees a greater hygiene and productivity, as the operator has the maximum control in the hand, like the selection of the steering of course touching a button, without need of soltar the steering wheel or the joystick. The semi-automatic alignment of the wheels is a help for the operator when changing between the three ways of steering: 2 wheels, 4 wheels and trip in diagonal. The auxiliary discharge also controls with precision and ease by means of the joystick.
The new digital screen presents to the operator fast and comprehensible information of the operation of the machine, like a continuous indicator of the angle of nivelación of the frame. When it activates the function of nivelación, the screen changes automatically to show the angle of the machine to a side or the another and that like this the operator always know the conditions of work.
The value of the angle of inclination of the telescopic feather also indicates in the screen LCD to facilitate the precision of the movements and the rapidity of the cycles of work in repetitive tasks. To this rapidity also contributes the maximum speed of 30 km/h with which the new models can move of a place to another, speeding up like this the travel.
The design of the manipuladores telescopic guarantees a minimum loss of scope when they deploy the stabilisers. The hygiene sees increased thanks to the system of detection of the stabilisers, that watches continuously the pressesure that exert on the floor to guarantee that there are not escapes or falls and that his use was sure at all times. The stabilisers, with his compact size and his ease of use, ensure that the manipuladores telescopic can use without limitations in the most reduced spaces and near of walls. Besides, the optimum direccionalidad with minimum angles of steering does that the machines have big manoeuvrability and are very easy to situate in any work.
Optimum reliability and ease of service
To attain the maximum operative time and ease of service, the active diagnostic of the main hydraulics valve supervises three fundamental parameters: position of the carrete, control of the electrical tension and surveillance of the sensor. The system ensures that the operation of the machine keep inside safe limits even in case of hydraulics failures. The luminous indicators of the remote control show the possible problems related with the hydraulics and the safe operation of the machine (hydraulics movements, stabilisers, etc.). The control of the stabilisers is allowed if the position of the feather is safe (retraída or with little angle).
Telescopic Bobcat with basket portapersonas.
The hydraulics and electrical systems of new generation guarantee that the operation was optimum and the useful life of the machine lengthen . A new unit of refrigeration offers a stable and comfortable control of the temperature of the hydraulics oil and optimises the length of the latiguillos hydraulics.
The complete protection of the cylinder of inclination inside the feather deletes the risk of damages and increases the hygiene of the operator. The integrated design of the cabezal of the feather provides the reinforcement to elevate heavy loads, at the same time that greater tranquility when it works with a platform. They have installed zapatas protective of new generation, as well as screws and insertions of steel of greater size to improve the resistance to the wear.
The new manipuladores telescopic T40140 and T40180 incorporate an electronic architecture optimised already used in the models TL470 and TL470HF. The new route of the latiguillos hydraulics by the frame reduces 18% the possible vanishing points; besides, the hydraulics system also includes controllers with protection IP67 in the main hydraulics valve.
The new T40140 and T40180 can supply with a big selection of options for the engine, hydraulics, feather, rear, cabin, frame and wheels. Also it offers a complete range of implementos for the manipuladores telescopic T40140 and T40180, such as different types of spoons of excavation, platforms, spoons hormigoneras, forks portapallets, nibs and cabrestantes.
