Disset Odiseo, S.L. - Lifting platforms (for internal logistics)
Lift tables: for the lifting and transport of loads
Lift tables are part of the extensive range of products offered by Disset Odysseus for the lifting and transport of loads. A very reliable and indispensable tool are to time save differences of height of level in the factory or manufacturing line.
They consist of a mechanism of scissors, which can be single, double, triple or quadruple, with bearings requiring no maintenance. The lifting force is produced by the action of one or two hydraulic cylinders set the Scissor mechanism inside. Each cylinder has integrated a valve that limits the speed of decline up to 50% of the speed allowed by the hydraulic circuit. In addition, there is a safety valve which reduces the flow in the event of sudden decrease of the table. Tables are members of a unit of power within the chassis (or outside in the case of extraplanas tables) and a Ribbon of contact of aluminum, attached to the perimeter of the upper platform, which stops the descent when it encounters an obstacle. They also have a switch of end of career which automatically stops the table when it reaches its maximum height.
The tables are controlled by a box of switches connected to the electrical panel. They have function operator present, by which the movement of the table occurs only while the switches are powered. Push button box also includes a button for emergency or safety stop. When it is clicked the table stops and of rise and decline buttons are disabled until the operator desenclava the emergency button. They incorporate support for fixing to the inspection or repair.
Supplied with manual of use and maintenance, and the EC declaration of conformity according to European regulations. Lift tables represent a model to be followed by companies in carrying out its responsibility of providing a safe workplace, according to European directives. Also comply with the standards ISO 9001 / ISO 14001.
They consist of a mechanism of scissors, which can be single, double, triple or quadruple, with bearings requiring no maintenance. The lifting force is produced by the action of one or two hydraulic cylinders set the Scissor mechanism inside. Each cylinder has integrated a valve that limits the speed of decline up to 50% of the speed allowed by the hydraulic circuit. In addition, there is a safety valve which reduces the flow in the event of sudden decrease of the table. Tables are members of a unit of power within the chassis (or outside in the case of extraplanas tables) and a Ribbon of contact of aluminum, attached to the perimeter of the upper platform, which stops the descent when it encounters an obstacle. They also have a switch of end of career which automatically stops the table when it reaches its maximum height.
The tables are controlled by a box of switches connected to the electrical panel. They have function operator present, by which the movement of the table occurs only while the switches are powered. Push button box also includes a button for emergency or safety stop. When it is clicked the table stops and of rise and decline buttons are disabled until the operator desenclava the emergency button. They incorporate support for fixing to the inspection or repair.
Supplied with manual of use and maintenance, and the EC declaration of conformity according to European regulations. Lift tables represent a model to be followed by companies in carrying out its responsibility of providing a safe workplace, according to European directives. Also comply with the standards ISO 9001 / ISO 14001.
