Euspray by Eurospray Spray and Filter Technology, S.L. - Humidifiers and dehumidifiers
Euspray Misting Cooling
System to nebulize and refresh: it reduces the temperature of the environment and eliminates the dust
The Misting Cooling system uses a natural phenomenon as the evaporation of water, to reduce the temperature of the environment and eliminate dust.
Water needs energy (= heat) to evaporate: the mains water has an average temperature of 12 ° C. Once atomized in micro drops to 100 bar pressure, it spreads in the environment in the form of very fine mist. If the air temperature is below 25 ° C, the water particles micro subtract heat-friendly cooling it.
Misting Cooling system, thanks to sophisticated technology, make that the evaporation process is very fast and to occur until the water it can fall to the ground, avoiding the surrounding surface is wet.
Extremely fine nebulization of the water produced in the environment allows to get practically instantaneous evaporation. The step from the liquid state to the gaseous state subtracts energy (heat) to the environment in total respect of nature.
The drops of a few microns in size are produced by special nozzles that are fed by pumps of high quality to a pressure higher than 70 bar.
Misting Cooling systems can be used in all environmental conditions in which it is impossible or is especially burdensome to employ a traditional air conditioning system or an air conditioning system.
In addition, the Elimination of dust and pollen partially reduces the effects caused by allergies. The droplets of water, in the form of very fine mist, have the ability to capture and make fall the dust and pollen particles to the ground, increasing its specific weight.
Thanks to the system of control "I Control" can achieve and maintain the required humidity level. Misting Cooling systems can be installed both outdoors and indoors.
Designed and fully manufactured in Italy this system is capable of: reduce the temperature, remove dust and pollen, create barriers against odors, optimize the microclimate, chase away insects and mosquitoes, reduce electrostatic charges, facilitate the operation of the mechanical components (radiators, heat exchangers, systems of ventilation, etc.). It is easy to install and consumes very little power, thanks to the high efficiency of the pump.
Water needs energy (= heat) to evaporate: the mains water has an average temperature of 12 ° C. Once atomized in micro drops to 100 bar pressure, it spreads in the environment in the form of very fine mist. If the air temperature is below 25 ° C, the water particles micro subtract heat-friendly cooling it.
Misting Cooling system, thanks to sophisticated technology, make that the evaporation process is very fast and to occur until the water it can fall to the ground, avoiding the surrounding surface is wet.
Extremely fine nebulization of the water produced in the environment allows to get practically instantaneous evaporation. The step from the liquid state to the gaseous state subtracts energy (heat) to the environment in total respect of nature.
The drops of a few microns in size are produced by special nozzles that are fed by pumps of high quality to a pressure higher than 70 bar.
Misting Cooling systems can be used in all environmental conditions in which it is impossible or is especially burdensome to employ a traditional air conditioning system or an air conditioning system.
In addition, the Elimination of dust and pollen partially reduces the effects caused by allergies. The droplets of water, in the form of very fine mist, have the ability to capture and make fall the dust and pollen particles to the ground, increasing its specific weight.
Thanks to the system of control "I Control" can achieve and maintain the required humidity level. Misting Cooling systems can be installed both outdoors and indoors.
Designed and fully manufactured in Italy this system is capable of: reduce the temperature, remove dust and pollen, create barriers against odors, optimize the microclimate, chase away insects and mosquitoes, reduce electrostatic charges, facilitate the operation of the mechanical components (radiators, heat exchangers, systems of ventilation, etc.). It is easy to install and consumes very little power, thanks to the high efficiency of the pump.
