GS tècnic periféricos y componentes, S.L. (Gstècnic) - Enfriadoras-refrigeradoras de agua; equipos de frío
Industrial Frigo Serie TW-WTA
Thermoregulation plants: to winterize moulds and cylinders
Plants of thermoregulation with Tw-wta series, with maximum service temperature water of + 95 ° C, have been projected to winterize moulds and cylinders for various industrial processes, which include plastics and rubber, the extrusion molding and cartotecnico sector. These power stations of thermoregulation is subdivided into two main groups depending on the performance required, precisely: series Tw-wta in pressure, and themselves in /D in selectable pressure depression /DP with pressure and depression at the same time.
These essentially built by: • circuit heating with electric resistances of the type armoured with wide exchange surface.
• The heating elements with static groups of power (increased efficiency, reliability, lower noise level and no wear on the contactors).
• Cooling circuit with Exchange of high-efficiency (D-DP-S-SM) • solenoid valve for cooling (modulator on request "V") • centrifugal pump of recirculating the water (peripheral for the D version in pressure/depression).
• Hydraulic system of contemporary presion-depresion (DP version) - patented.
• Steel tank.
• Chassis with wheels.
• Control Panel with electronic instrument with microprocessor for the control of the temperature with both heating and cooling PID type regulation.
• RS485 serial communication with Modbus (optional) Protocol.
• Kit with external probe with thermostat (optional) • accessories available: interception valves, manifolds with various supplies and returns, connection tubes coated with stainless steel braid and insulated with fiberglass and rubber silicone.
These essentially built by: • circuit heating with electric resistances of the type armoured with wide exchange surface.
• The heating elements with static groups of power (increased efficiency, reliability, lower noise level and no wear on the contactors).
• Cooling circuit with Exchange of high-efficiency (D-DP-S-SM) • solenoid valve for cooling (modulator on request "V") • centrifugal pump of recirculating the water (peripheral for the D version in pressure/depression).
• Hydraulic system of contemporary presion-depresion (DP version) - patented.
• Steel tank.
• Chassis with wheels.
• Control Panel with electronic instrument with microprocessor for the control of the temperature with both heating and cooling PID type regulation.
• RS485 serial communication with Modbus (optional) Protocol.
• Kit with external probe with thermostat (optional) • accessories available: interception valves, manifolds with various supplies and returns, connection tubes coated with stainless steel braid and insulated with fiberglass and rubber silicone.
