This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Kimberly-Clark presenta una gama de EPI anticorte para el sector metalmecánico
Kimberly-Clark presents a range of EPI anticorte for the sector metalmecánico
20/11/2012
20 November 2012
In the applications with big panels of sharp edges like the existent in the cut and pressesing of formats in the industry automotriz, the worker requires a high level of resistance to the cut. Thus, the resistant gloves to the cut Jackson Safety G60 Level 5 with fibre Dyneema, manufactured of fabric of thread World Fiber, combine an upper protection with skill of Level 3. Besides, the connectivity of the manguito resistant to the cut Jackson Safety G60 Level 5 with fibre Dyneema guarantees that the critical zone of the dolls remain protected even with the arm pulled, giving more tranquility.
In humid applications or aceitosas that require a resistance to the cut moderated, the resistant gloves to the cut Jackson Safety G60 Level 3 with fibre Dyneema provide an excellent hold and protection against perforación. In dry applications, like areas of storage, the resistant gloves to the cut Jackson Safety G60 Purple Nitrile offer protection ambidiestra for an economic cost of use.
In applications that involve the setting or assembling inside external pieces, like setting of salpicaderos or doors in the industry automotriz, the workers need a protection to the cut that extend until the forearm. The material that uses in a lot of manguitos resistant to the cut irritates the leather and causes discomfort in the worker. The manguitos resistant to the cut Jackson Safety G60 Level 2 with and without hole for the thumb offer an innovative revestimiento of cotton that gives comfort to the worker.