This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Secadores de manos que ‘barren’ el agua como un limpiaparabrisas

Dyson launches new models of his line Airblade

dryers of hands that ‘sweep' the water like a limpiaparabrisas

Editorial Interempresas14/02/2013

The dryers of conventional hands evaporate the water of the hands by means of a column of hot air, air that generally is full of bacteria. Besides, they do not achieve to dry the hands in a suitable time, by what a lot of people finish desisting. The new models of Dyson Airblade Tap, V and Mk2, developed by a team of 125 engineers, are promoted by the last digital motors of the British signature and dry the hands of form faster and effective.

Model Dyson Airblade Tap.

The new dryers of hands Dyson Airblade Tap, V and Mk2 dry entirely the hands thanks to two fine aberturas by which the air goes out to 430 km/h, sweeping the water of the hands as if it was a limpiaparabrisas.

Besides, the digital engine of Dyson is one of the motors of 1.600 W smaller of the world. Thanks to the technology of digital pulse, accelerates of 0 to 90.000 rpm in less than 0,7 seconds.

Another advantage of these new dryers is that before expelling the air on the hands, the dryer of hands Dyson Airblade happens the air through a filter Hepa that deletes 99,9% of the bacteria that contains the air of the aseo.

According to words of James Dyson, “by means of the use of complex computer simulations, the engineers of Dyson have achieved to develop a digital engine of high performance that car-adjusts 6.000 times by second. Thanks to his optimum efficiency, is able to create a fine layer of air to big speed that dries the hands of fast and hygienic form”.

Dyson Airblade V.

New models

Dyson Airblade Tap

The new dryer of hands Dyson Airblade Tap (available from June of 2013) is a tap, manufactured in stainless steel, that washes and dry the hands without need to move of the toilet. When the hands are in position of wash, his infrared sensors will expel water on the hands. When the user wish to dry them, the sensors will activate the digital engine and two fine layers of air to temperature acclimatise will go out expelled to big speed by the sides of the tap, drying the hands entirely in 12 seconds.

Dyson Airblade V

The model Dyson Airblade V (available from this month of February) is 60% smaller that the original model. The engineers of Dyson have achieved to concentrate the technology Dyson Airblade without engaging his rapidity and efficiency. The dryer of hands Dyson Airblade V uses two fine layers of air to big speed, with an angle of 115 degrees, to sweep the water of the hands as if it was a clean-windscreen. It is manufactured in polycarbonate, a resistant material that employs in the shields of the antidisturbios. Dry the hands in 10 seconds.

Dyson Airblade Mk2.

Dyson Airblade Mk2

The engineers of Dyson have rediseñado the dryer of hands Dyson Airblade (available from this month of February) to recess in 40% his broadcasts of carbon during his manufacture. The engineers have achieved to delete 2,5 kg of materials of each dryer of hands, doing it lighter. It is the only dryer of hands endorsed by the HACCP, by what is indicated for his use in places where manipulate foods and/or drunk. It is manufactured in polycarbonate ABS, a robust and resistant material. Dry the hands in 10 seconds.