Hexagon Metrology Presents the new cabezales of measurement HH-To-T2.5 and HH-To-H2.5 for MMCs
The series of the new cabezales of measurement HH-To-2.5 of
The cabezales of measurement characterise , besides, by a system of accionamiento totally new, included toothed Hirth for the exact positioning of the sensor. This makes possible a high number of possible positions, as well as a quite high pair. The cabezales of measurement can mount directly in the MMC with a stem or a brida. Alternatively, it exists a version that in each MMC mounts with a pinola 80 mm. The sensors are installed with the union TKJ or HDKJ and can change manual or automatically. Here it is not necessary any recalibrado.
Cabezal Of measurement HH-To-T2.5: the new degree of freedom
The cabezal of measurement Hexagon Metrology HH-To-T2.5 can indexarse in steps of 2,5° and like this adjust in 12.240 reproducible positions. The cabezal of measurement is instrumented with a cinematic element of union (TKJ). East makes possible, in combination with a Multi Wire, the connection to different sensors. The element of union can instrument with prolongations of until 450 mm.
Cabezal Of measurement HH-To-H2.5 for the most demanding applications
The HH-To-H2.5 can indexarse in steps of 2,5° and turn in the Axis To ± 180°. Like this, it can adjust in 20.736 reproducible positions. It is instrumented with a cinematic element of union of high capacity of load (HDKJ), what makes possible, in combination with a Multi Wire, the connection to different sensors. The element of union can instrument with prolongations of until 750 mm. Like this, by means of the combination of a pair extremely high with the new adapter HDKJ can use, among others, sensors Non-Contact or Scanning far of the cabezal of measurement. This is not possible in the case of conventional devices.