The new functions of the CNC of Fanuc improve the ease of handle and the operation of the machines

If it wants to produce of efficient form, needs machines of high performance and the highest level of availability. Other key factors for an efficient operation are the simple programming and the ease of handle. Fanuc Will present in EMO 2013 novelties that contribute to improve these three appearances: performance, availability and ease of handle. With the new functions of mechanised of 5 axles of high performance and a new generation of servo processors achieves a better superficial quality with cycles of mechanised shorter. The precision of finishing (tolerance) to achieve in the surface mechanised can specify in advance, influencing, with this, in the time of mechanised.

Portable console iPendant.

The CNC of Fanuc complete with new and interesting products of hardware. It deserves special quotation the 'Safety Machine Operators Signpost'. All the pulsadores of this signpost of control are instrumented with double contact. The signpost of operator communicates with the system CNC road I/Or link i FANUC and in this way integrates easily in the Dual system Check Safety of Fanuc.

There are available improvements for the Control of Positioning Power Motion i-To, that presented in the EMO two years ago. A new characteristic is the function 'High Response Motion Control' that allows to synchronise axles more quickly. Whereas the intervals of signals oscillated previously between 4 and 8 ms, now all the information required for the synchronisation is executed in cycles of 1ms.

Power Motion.

The device iPendant, portable console, allows to handle the CNC with identical screens in remote way that from the signpost of main control. The iPendant is also available with function of tactile screen. The turned off of emergency, keys of confirmation and, from recently, an electronic steering wheel (Manual Presses Generator) as well as an interface USB, complete the characteristics of the iPendant.

Now the icons can program to simplify the operation of the CNC. Of similar way to a Smartphone, can activate the content of a screen CNC, directly pressesing the corresponding icon in the tactile screen.

Fanuc Offers a maximum of hygiene with the function '3D interference check'. This function finds integrated directly in the core of the CNC of the series 30i/31i/32i and warns practically to the one hundred by one hundred the risk of collisions. The monitoring takes place in real time having constantly in account the current state of the machine. This allows that the protection against hits was active in each one of the movements of the machine, even during the manufacturing. Fanuc Also offers a function of hygiene of this type called 'Collision Guard' for robots.

The reliability and durability are two characteristics that distinguish to the products FANUC and the functions of preventive maintenance that offer contribute to keep these qualities:

• The technology ECC (Error Correction Code) that applies in the CNC, detects and corrects errors of transfer of internal data that they can be caused by own factors of the industrial surroundings such like vibrations, steam of oil and electromagnetic fields. Thanks to this system the machines work without errors during much more time.
• Another of these functions is the ‘monitoring of the state of the machine' that allows to obtain information of sensors and of the state of the machine. This information could receive even through ecouriers in a smartphone.