News Info News

This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Hypermaxx, ahora también disponible para mecanizados 2D
Open Mind Expands the strategy of desbaste of high performance

Hypermaxx, now also available for mechanised 2D

Editorial Interempresas18/11/2013

From 2011, Open Mind offers a strategy of ‘High Performance Cutting' (cutting of high performance) thanks to Hypermaxx. This strategy allows to reach some volumes of shaving notably greater by unit of time at the same time that protects so much the tools like the machines. By this reason, the technician, that has showed a correct operation in the mechanised 3D and of 5 axles, can employ now in the tasks 2D.

Hypermaxx, the complete module of desbaste integrated in Hypermill, offers some paths of milling optimum, a maximum withdrawal of material and some times of minimum manufacture. The ideal distribution of the paths of milling and the adjust dynamic of the advance to the conditions of existent cutting achieve that the milling effect always to the maximum speed of advance.

Hypermaxx, the module of cut of high performance, now also available for the milling of cashiers 2D
Hypermaxx, the module of cut of high performance, now also available for the milling of cashiers 2D.

The mechanised carries out exclusively in milling trepado, with shrinkings in spiral of the paths of the tools, that at the end approximate always more to the outline wished. The tool of milling works usually with the length of complete cutting and the system has a special algorithm that commissions that always it withdraw the same volume by tooth of milling. Of this form, the tool can use to full performance without arriving to overload it and produces a big total volume of shaving by unit of time.

The condition for a mechanised optimum roots in the dynamic adaptation of the advance to the conditions of existent cutting. Like this, the user does not have to enter any fixed value of revolutions neither advance, but data of reference that so much the tool like the corresponding machine tool can apply. The path of tool of Hypermaxx calculates taking into account the volume of shaving and a harmonic distance. Of this form, the method results adapted so much for soft materials, like the aluminium, as for others harder, like the steel, the titanium and the alloys of nickel.

Precisely in the case of the slots, cashiers and prismatic pieces often is possible to save to a large extent with Hypermaxx...
Precisely in the case of the slots, cashiers and prismatic pieces often is possible to save to a large extent with Hypermaxx.

Main advantages of Hypermaxx

  • Tool and machine bear uniform efforts during all the mechanised
  • Time reduced of operation of the machine
  • fast Positioning and sure of the tool
  • The macro of entrance generates always a helicoidal or staggered movement complete: it is not necessary to indicate a radius propeller, since it calculates automatically
  • do not produce sharp edges or sudden changes in the steering of milling
  • intelligent Automatisms for the adaptation optimised of the advance and the past during the mechanised of narrow zones with complete cut and paths of long tool (soft material), as well as of paths trocoidales to avoid the complete cut (material harder)
  • Can penetrate with the 100 % of the diameter of the tool without that the material detain
  • The process to protect the tools generates another positive effect: the users can access with frequency to other qualities of milling simpler with costs much more reduced
  • is not necessary to realizar an adaptation of the postprocesadores, since Hypermaxx is entirely integrated in Hypermill.

Enlargement for the mechanised 2D and of 5 axles

Hypermaxx Will be able to use also in mechanised 3D for any outline of piece in the rough, as well as in the desbaste equidistant of pieces of 5 axles. Open Mind Offers this strategy of optimisation for the cut of high performance and for the milling of cashiers 2D.

In the milling of cashiers 3D is possible to mechanise to a notably greater speed any cashier, already was open or enclosed, cashiers with islands, etc., with help of Hypermaxx.

Hypermaxx, the module of cut of high performance for 2D, 3D and 5 axles of Open Mind
Hypermaxx, the module of cut of high performance for 2D, 3D and 5 axles of Open Mind.

Hypermill 2011 entered the desbaste and equidistant finishing of 5 axles. In this process, the surfaces curves of a component, as for example, the carcasa of a turbine, the structural pieces of the aeroplanes or the moulds of tyres, take like normal surfaces. In this case, the tool works in each point with an angle of 90 degrees. This strategy works therefore as if it treated of a desbaste or finishing in Z ‘flexionado'. This procedure facilitates enormously the creation of the program of CN.

Comments on article / news piece

New comment

Warning

Los comentarios son la opinión de los usuarios y no la del portal. No se admiten comentarios insultantes, racistas o contrarios a las leyes vigentes. No se publicarán comentarios que no tengan relación con la noticia/artículo, o que no cumplan con el Aviso legal y la Política de Protección de Datos.

Advertencias Legales e Información básica sobre Protección de Datos Personales:
Responsable del Tratamiento de sus datos Personales: Interempresas Media, S.L.U. Finalidades: Gestionar el contacto con Ud. Conservación: Conservaremos sus datos mientras dure la relación con Ud., seguidamente se guardarán, debidamente bloqueados. Derechos: Puede ejercer los derechos de acceso, rectificación, supresión y portabilidad y los de limitación u oposición al tratamiento, y contactar con el DPD por medio de lopd@interempresas.net. Si considera que el tratamiento no se ajusta a la normativa vigente, puede presentar una reclamación ante la AEPD.

Suscríbase a nuestra Newsletter - Ver ejemplo

Password

Select all

Autorizo el envío de newsletters y avisos informativos personalizados de interempresas.net

I authorize the sending of communications from third parties via interempresas.net

He leído y acepto el Legal notice y la Data protection policy

Responsable: Interempresas Media, S.L.U. Purpose: Subscription to our newsletter(s). User account management. Sending emails related to the same or related to similar or associated interests.Retention: for the duration of the relationship with you, or as long as necessary to carry out the specified purposesTransfer: Data may be transferred to other group companies for internal management purposes.Rights: Access, rectification, opposition, deletion, portability, limitation of processing and automated decisions: contact our DPD. If you consider that the processing does not comply with the regulations in force, you may lodge a complaint with the AEPD.More information: Data protection policy

REVISTAS

TOP PRODUCTS

NEWSLETTERS

  • Newsletter Automatización y Componentes

    04/09/2024

  • Newsletter Automatización y Componentes

    31/07/2024

Highlighted links

Matelec - IFEMAX JornadasAdvanced Factories

Latest news

Featured companies

OPINIÓN

ENTIDADES COLABORADORAS

OTRAS SECCIONES

Services