News Info News

This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Un sistema completo para un menor coste por preforma
The Husky H-PET AE system manufactures preform up 2.5% more light

A complete system for a lower cost by preform

Drafting Interempresas31/03/2011
husky injection molding systems is one of the greats when it comes to injecting preforms, a business in which saving of cost per piece is very important in view of the thousands of PET bottles that are consumed in the world to date and that are made from of preform injection. Make fast already is not enough, now the challenge is to do so quickly, with quality, with low weight and cost that the market can accept.
H-pet AE stands out for its precise control of the process...
H-pet AE stands out for its precise control of the process, the accuracy of the tolerances for mould and the high quality of peripherals

Husky Injection Molding Systems offers its fully electric injection system H-PET AE for the manufacture of PET preform. It was presented at the 2010 edition of the K fair and as well as being compact and efficient, requires little maintenance. The cost per piece of preform them this new machine is very low and its optimal energy consumption. Responds to the needs of customers in emerging markets and is especially suitable for low volume manufacture of preforms for third parties and manufacturers of bottles in niche markets. In this way, Husky addresses a segment of the broader market in order to provide the best return on investment to manufacturers who are starting in the PET market or want to expand their activities in the same. Some of its notable points are his precise control of the process, the precision of mold tolerances and high quality peripherals, resulting in a machine that reduces the cost per piece. The H-PET AE system requires a lower investment of capital and is available with different closures, plasticizers and cavities of mould.

In the K could be a model with 32 cavities, producing a preform of 22 grams of EcoBase for bottle of still water of a litre, in a cycle of 11.8 seconds. Preform them EcoBase are up to 2.5% more light other preforms of low weight, allowing to reduce the consumption of material. Husky provides this type of turnkey solutions, including machine, the mold, the system of hot channels, wiring, electrical distribution and peripherals, all of this is controlled from the Polaris control system. In this way the manufacturer avoids having to compose their own manufacturing cell and can count on the warranty and Husky advice during the lifetime of the manufacturing cell. H-pet AE includes various improvements that improve the flexibility of the configuration for the manufacturers of preforms and bottles, using a single machine for various applications, such as the possibility of changing moulds with minimal loss of time.

HyPET PPH cannot manufacture a preform with a thickness of 1.5 mm wall and a wall of the thread of 0.8 mm, for a bottle of 500 ml for still water...
HyPET PPH cannot manufacture a preform with a thickness of 1.5 mm wall and a wall of the thread of 0.8 mm, for a bottle of 500 ml for still water.

More productivity, less energy

On the other hand, another innovation of Husky is the so-called HyPET High Performance Package (HPP) for the manufacture of large quantities of preforms. Stands out for its cycle and their energy efficiency, while maintaining a high level of reliability, repeatability, and quality of preform them.

Also introduced the model in the K, where he worked with a cast of 96 cavities making EcoBase preform for bottles of 500 ml of water without gas, 9.9 grams in weight and in a rough course of 5 seconds. Given that Husky supplied the entire line, is in your hands the improvement of aspects as the flow of the material from the pellets up preform, achieving a higher quality of her preform and a significant improvement in the injection of preform of thin wall. For example, a preform for bottle of 500 ml for water without gas, it is possible to make a preform with a thickness of 1.5 mm wall and a wall of the thread of 0,8 mm.

The new system can reduce the cycles in at least 5% and improve energy efficiency by 15% in comparison with standard systems HyPET. The stability of the process of the new HyPET PPH is greater, in the same way as the constancy of the pieces. Greater integration of the production line simplifies implementation, while maintaining the operating tonnage and warning when the machine requires maintenance. This prolongs their service life.

Suscríbase a nuestra Newsletter - Ver ejemplo

Password

Select all

Autorizo el envío de newsletters y avisos informativos personalizados de interempresas.net

I authorize the sending of communications from third parties via interempresas.net

He leído y acepto el Legal notice y la Data protection policy

Responsable: Interempresas Media, S.L.U. Purpose: Subscription to our newsletter(s). User account management. Sending emails related to the same or related to similar or associated interests.Retention: for the duration of the relationship with you, or as long as necessary to carry out the specified purposesTransfer: Data may be transferred to other group companies for internal management purposes.Rights: Access, rectification, opposition, deletion, portability, limitation of processing and automated decisions: contact our DPD. If you consider that the processing does not comply with the regulations in force, you may lodge a complaint with the AEPD.More information: Data protection policy

REVISTAS

TOP PRODUCTS

NEWSLETTERS

  • Newsletter Plástico

    19/09/2024

  • Newsletter Plástico

    12/09/2024

Highlighted links

Fundación Andaltec I+D+iEnfriadoras Inteco, S.L.U.Plastics & Rubber

Latest news

Featured companies

OPINIÓN

ENTIDADES COLABORADORAS

OTRAS SECCIONES

Services