This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Hasco amplía la gama de boquillas Techni Shot

Hasco Expands the range of filters Techni Shot

05/12/2012

5 December 2012

Hasco Has expanded the program of the filters of hot channel Techni Shot with the tips of torpedo opened for applications of closing of needle. With these filters, available as much as individual filters for simple uses as for moulds of smelting injected with distribution of hot channel, can reach depths until 300 mm and produce middle-sized injected pieces until 1.700 g of weight by injected.

For these filters, are available all the ranges of leading, materials of work and carcasas leading atornillables. This allows to combine a driving of optimum heat in the area of cut with an excellent resistance against abrasive wears, even for plastics with heights contained of material.

Another novelty of the series of filters is the size type 20, designed for weights by embolada smaller and small distances between cavity. A surface of sealed defined in the nuts of union offers a transfer of low heat.

It has loaned special attention to the ease of the maintenance, guaranteeed by the possibility of replacement of all the important pieces like resistance, thermocouple, bodies of filter, leading and carcasas leading.

Adopting constructive measures, can realise the change of the thermocouple without need to disassemble the leading of the filter. Like this, it minimises considerably the need of maintenance. The filter is indicated for all the fields of application, especially for technical plastics and reinforced.

The new heating offers a uniform distribution of the temperature, what gives place to a profile of heat homogéneo along all the channel of smelting. Thanks to the suitable location of the thermocouple in the tip of the filter and the isolation of titanium achieves a precise regulation of the temperature, so that also it can work of a safe way with technical plastics with thermal sensors ranks reduced.