News

This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at LSP-X1h alcanza todas las características de una pieza de trabajo

Leitz introduced a new sensor for coordinate measuring machines

LSP-X1h reaches all the characteristics of a piece of work

Drafting Interempresas25/05/2011

Leitz, part of Hexagon Metrology, is a symbol of systems of measurement for coordinates, highly precise measurement of gears and heads of probe centres. Systems guarantee the quality in the measuring room as well as in the environment of the workshop. The development and production are carried out in Wetzlar, Germany. For more than 30 years, Leitz offers its customers innovative measurement in order to continue to provide modern solutions for demanding measuring tasks. On this premise, Leitz introduced LSP-X1h sensor, available for measurement of coordinates of the Leitz Reference Series machines.

The new LSP-X1h model can accommodate extremely long probes: lengths of transducer of 225 to 20 mm in axial direction and up to 50 millimetres in the lateral direction. The maximum weight of transducer is 33 grams. The sensor is installed in the orientable head Tesastar-d. thanks to the tilt and Swivel, head to the length of the beam and the small outside diameter, LSP-X1h is capable of reaching each and every one of the characteristics of the work piece. LSP-X1h is compatible with most recent Leitz coordinate measuring machines: Leitz Reference Xi and Leitz Reference XT.

New sensor Leitz LSP-X1h.

As all the other heads of measuring Leitz LSP-X1h combines various measurement technologies in a single sensor: also the palpados of point to point and measurement using autocentraje, as well as the scanning of high speed and accuracy for fast and accurate measurements of shapes and contours in parts are possible. 3D probe of Leitz systems measured in each probe of a surface of piece at the same time in the direction X, and y Z and, therefore, automatically in the direction of the surface normal. In this way can be calculated and compensated for the deflection of the probe from the measurement software.

Leitz Reference Xi with the LSP-X1h sensor installed.

Responsable: Interempresas Media, S.L.U. Purpose: Subscription to our newsletter(s). User account management. Sending emails related to the same or related to similar or associated interests.Retention: for the duration of the relationship with you, or as long as necessary to carry out the specified purposesTransfer: Data may be transferred to other group companies for internal management purposes.Rights: Access, rectification, opposition, deletion, portability, limitation of processing and automated decisions: contact our DPD. If you consider that the processing does not comply with the regulations in force, you may lodge a complaint with the AEPD.More information: Data protection policy