Two new Haas machines jump to the fore in the BIEMH 2010
Drafting Interempresas
15/04/2010The DT-1 Haas has full capacity of milling CNC and undoubtedly represents one of the most interesting developments of the company. It has a workspace of 508 x 406 x 394 mm and a table with grooves in T of 660 x 381 mm A powerful cone ISO 30 15,000 rpm spindle allows Threading pieces at speeds up to 5,000 rpm. The DT-1 also comes with a 20 position tool changer and offers rapid advances of 61 meters per minute on all axes. Due to high rates of acceleration and deceleration, cycle times are low and reduce downtime. The DT-1 is the integrated CNC machine perfect for most busy general machining workshops.
The new center of turning high-performance Haas ST-30, designed to provide power intensive Court, extreme rigidity and high thermal stability, it has a maximum capacity of Court of 533 x 660 mm and offers organizes maximum 806 mm on bench and 527 mm on transversal carriage. The typical configuration of the ST-30 includes a spindle with transmission gears of 22.4 kW, which provides a pair of Court of 1,139 Nm to 200 rpm and a maximum speed of 3400 rpm. Other features that improve productivity are an automatic tools transducer, motorized tools and a high pressure cooling system.
Award-winning and practical machines CNC Haas continue to evolve with a series of new features designed to make the programming and management quicker and more effective. One of the new features that will be presented at the 2010 BIEMH is Program Optimiser, a system that records the settings in the variation of the speed of the spindle and the progress of work carried out during the cycle of the machineIt enshrines the activation and deactivation of refrigeration and the position of P-COOL and take notes during the cycle. Completion of the program, the operator press the F4 key and made settings are shown. When the operator chooses to accept the changes, Program Optimiser will edit the programme automatically with speeds, the progress of work and recorded notes, and will show what the original values in parentheses.
Spain has two stores of the factory Haas (HFO): Easymill S.L., in Vitoria-Gasteiz, and Sogemec, in Madrid. Spanish Haas customers working in sectors such as automotive, wind turbines, elevators, power tools, aerospace, education, food and packaging and packaging. Currently, there are more than 500 CNC machine tools of Haas installed in Spain.