Frontal slots of big depth in diameters reduced
The range of tools of precision for the mechanised of small pieces of
In reply direct to the demands of the manufacturers of components for pumps, now, with the range CoroTurn XS, can reach depths of ranurado frontal until 30 mm. The previous maximum was of 6 mm. Indicated for all type of special materials, the new plaquita of size 08 offers depths of 3 to 15 mm (widths of 2 to 4 mm) in diameters of 10 to 16 mm; whereas the plaquita again size 10 offers depths of 5 to 30 mm (widths of 3 to 5 mm) in diameters of 12 to 20 mm.
As I complement to these plaquitas, are available new adapters/tool holders for bars of mandrinar, tool holders Coromant Attract and mangos of tool; guaranteeing so the new tools can be used in all type of lathes, so much in positions of inner tool like outsides. The supply of refrigerante inner is possible through the tool holders, while the fixed allows a simple and exact positioning of the plaquita to reduce the time of exchange and reglaje of the same.
The new range of plaquitas CoroTurn XS and adapters/tool holders of Sandvik Coromant.
Likewise, for the operations of inner turning general with the tools of the same family, the extension of the plaquitas of the geometry -To in the sizes 04, 05, 06 and 07 offers a greater control of the shaving, an optimised hygiene of the process and a prolonged useful life of the tool.
