VOX Milling of smelting, series in expansion
The strawberry VOX400 has been developed predominantly like a robust tool to cover a wide spectrum of applications of milling of smelting. The design of the plaquitas of tangential cutting allows to absorb the efforts of start of shaving to all the long of the length of the plaquita of cutting and no only along the thickness, a lot lower.
This absorption of the efforts of start of shaving presents several impressesive advantages, that manifest in an increase of the efficiency and the versatilidad.
In comparison with the conventional milling cutters, is possible to increase enormously the maximum depth of cutting. It is possible to attain depths of cutting relatively elevated also with methods of mechanised standard.
However, generally this drives to unsteadiness by vibrations and fault of rigidity, seeing prejudiced the quality of the pieces mechanised and the useful life of the plaquitas of cutting. This example of extra depth was observed in the mechanised of a base of smelting of a mould of presses of a Customer (GG40), having attained to increase the usual depth of cut of 5 until 10 millimetres, with a speed of cut of 230 m/min and an advance of 2050 millimetres.
In addition to the improvements in the efficiency like consequence of his greater stability, the new plaquitas of cutting SONX present 8 edges in front of the usual 4 edges of the plaquitas of vertical cutting. The greater number of useful edges supposes clear advantages in terms of profitability, but, in addition to this profit, in synergy with the convex geometry of the real edge and of the special design of the face of desprendimiento, allows to shorten of appreciable way the times of cycle with a performance of efficient cutting.
The tie up of the plaquitas of cutting realises with an only screw, by which results very easy his handle for the user. The extremely smooth surface of the coating ‘Black Super Smooth', together with the new quality recubierta by chemical deposition in phase steam (CVD) MC5020, contributes to prevent the adhesion of material that is used to to pose the mechanised by start of shaving of smelting.