Interempresas.net

es en ca
MetalWorking
  1. eMagazine MetalWorking
  2. Other articles

RSS Add to Google

Other articles
(full list)

Creating solutions for the sustainable development

16/04/2014
Editorial Interempresas
Picture of Creating solutions for the sustainable development
Henkel has published his Report of Sustainability of 2013, in which it details the important environingingmental evolution and social achieved by the company in the last year. The report, that is the 23º edition that publishes the company, stands out the innovations of sustainable products all over the world... [+]

More than 200 professionals and logistical companies assist to the 9ª edition of the debates Icil 2014

15/04/2014
Editorial Interempresas
Picture of More than 200 professionals and logistical companies assist to the 9ª edition of the debates Icil 2014
The past 25 March gathered in Madrid more than 200 professionals and logistical companies in the 9ª edition of the debates Icil: Discovering the morning. Once again, the event was the most important meeting point of the logistical sector to national level... [+]

The multimateriales and the additive manufacture centre the IV Congress R&D of STA

14/04/2014
Esther Güell
Picture of The multimateriales and the additive manufacture centre the IV Congress R&D of STA
In a competitive sector as it is the one of the automotive sector, the activities of R&D are not an option but a need. Conscious of this, from STA —Society of Technicians of Automotive sector— come realizar a series of technical congresses where share the last advances in subjects related with the sector... [+]

Igus Presents the first tribofilamento for printers 3D of the world

10/04/2014
Editorial Interempresas
Picture of Igus Presents the first tribofilamento for printers 3D of the world
Igus finishes to present in the fair of Hanóver the first tribofilamento for printers 3D of the world. The material is ideal like material for points of support, since it is until fifty more resistant times to the wear that the conventional materials for impressesion in 3D... [+]

Aserm Shows the reality of the manufacture 3D

04/04/2014
Esther Güell
Picture of Aserm Shows the reality of the manufacture 3D
The past 19 March celebrated in Barcelona the day ‘Design and 3D Printing: new fields of application' organised by Aserm —Spanish Association of Rapid Manufacturing— and the Museu of the Disseny of Barcelona. They assisted some 500 people interested so much in the reports like the back ‘workshop'.
[+]

Reliability in the process of labeling of tubes

31/03/2014
Editorial Interempresas
Picture of Reliability in the process of labeling of tubes
In the present edition of the living room ‘Tube Trade Fair' that celebrates in Düsseldorf of the 7 to 11 April 2014, will be able to see the solutions of Igorle & Smarktec, through his technological partner Rea, the one who exposes the new systems for the marked of variable information in tubes, so much in the interior as in the outside of the same, implemented from does some time in factories of the Spanish market... [+]

The cleaning: a critical factor for the quality of the process of manufacture

27/03/2014
Editorial Interempresas
Picture of The cleaning: a critical factor for the quality of the process of manufacture
The rests of dirt can alter the functions and the hygiene of the products. On the other hand, in the consecutive processes like the revestimiento, pegamiento, welding, temper, measurement, comprobación or setting requires a perfectly clean surface. It is necessary to know the procedures, means and measures that allow to obtain, check and keep the necessary quality of cleaning of economic and safe form for the processes... [+]

Improve the alliances and the transfer of knowledge, recipes of the XIV Meeting of the Mechanised

26/03/2014
Ibon Linacisoro
Picture of Improve the alliances and the transfer of knowledge, recipes of the XIV Meeting of the Mechanised
The past 25 March celebrated in Barcelona the XIV Meeting of the Mechanised, a new edition of the meeting organised by Aspromec that gathers to providers, tractor trucks companies and customers to boost the competitiveness of the SMEs. Alejandro Arjona, general director of Tebis Iberia and current president of Aspromec, inaugurated the event doing a review to the factors that can improve the competitiveness... [+]

Tubular threads for union of voestalpine Böhler Welding

25/03/2014
José María Miguel and Carlos Pérez of voestalpine Böhler Welding Spain S.A.
Picture of Tubular threads for union of voestalpine Böhler Welding
In the process of soldeo by electrical arch with tubular electrode (FCAW) the welding achieves by means of the power of an electrical arch established between a wire-continuous consumables electrode and the piece that suelda. Like this then , it is a similar process to the welding MIG / MAG since it exists a gas of protection to protect the zone soldered of the atmospheric pollution... [+]

Purification of the oils of cut in the manufacture of valves of engine

24/03/2014
Department of Engineering of Leak of Kefilt Europe, S.L.
Picture of Purification of the oils of cut in the manufacture of valves of engine
The following article tackles some of the problematic that present in the rectified of valves of engine with oils of cut with a degree of unsuitable leak.
[+]

Orpi Exhibits in BIEMH 2014 some of his solutions for the industry

15/04/2014
Editorial Interempresas
Picture of Orpi Exhibits in BIEMH 2014 some of his solutions for the industry
Orpi devotes to the distribution of equipment and machinery for the industry and the education. With representation in scoop for Spain of the main world-wide companies of manufacture of machines tools, software of education and automatisms in general, the signature attends again to the Biennial of Machine-Tool, with two stands, to show some of the novelties that has incorporated to his portafolio... [+]

The Biennial of Machine-tool, the beginning of the recovery

14/04/2014
Editorial Interempresas
Picture of The Biennial of Machine-tool, the beginning of the recovery
The sector of machines-tool and technologies of manufacture closed a very complicated year with an increase of the turnover of 6,4%, already in definite figures. Desglosando By subsectores, the machines grow 10%, the components 2,7% and the tools 1,4%. This growth bore fundamentally in a wallet of activity consolidated in the year 2012 whose delivery materialised in 2013... [+]

Simodec Closes his edition 2014 with a very positive balance

14/04/2014
Editorial Interempresas
Picture of Simodec Closes his edition 2014 with a very positive balance
The 60ª edition Simodec closed his doors to finals of February in The Roche-south-Foron, in the French region of Alta Saboya. This professional living room is a world-wide reference: a notoriety that is due to the quality of his offer and in his profile of accelerator of meetings. Some data on this edition 2014 that has harvested a success rotundo and fulfilled the expectations so much of display units as of visitors... [+]

Energetic efficiency, a universal challenge

08/04/2014
Brad Hutchinson, vice-president of Industry Marketing and Turbomachinery in Ansys; Sandeep Sovani, director of Global Automotive Industry; and Robert Harwood, director of Aerospace and Defense Industry
Picture of Energetic efficiency, a universal challenge
The turbomaquinaria moves the world to our around. The systems of turbine or of explosion play a key paper in the trucks that drive, the aeroplanes that transport us and the electricity that resupplies our homes and offices each day. Although the applications of the turbomaquinaria are incredibly diverse, there is a common challenge to all the engineers that design it: the need to improve the energetic efficiency... [+]

First appointment of the program of upper learning for the metal

02/04/2014
Ibon Linacisoro
Picture of First appointment of the program of upper learning for the metal
The 11 and 12 March celebrated in Madrid the first of the business forums of the Program of Upper Learning of the Sector of the integrated Metal in the Program DIR 360, under the sponsorship of Interempresas, WNT, Intermaher, Zoller, the Foundation Confemetal and Metcánica. These forums consist of a series of masterclasses and workshops that look for to approach to the mecanizadores to forms to work that they allow them be competitive... [+]

Automation of the milling of structural elements of big format by means of a robot Kuka of 6 axles

28/03/2014
Editorial Interempresas
Picture of Automation of the milling of structural elements of big format by means of a robot Kuka of 6 axles
Guy Martin Design, that devotes to the development and manufacture of prototypes for the molding of structural elements and industrial pieces, required an installation of mechanised of big dimensions in which can carry out a process CNC of 5 axles. The installation that looked for had to be able to mechanise no only pieces with a width until 1.524 cm (50 ft) and a height until 366 cm (12 ft), but also small pieces of filigree... [+]

Industrial lubrication: monitor to schedule

27/03/2014
Editorial Interempresas
Picture of Industrial lubrication: monitor to schedule
The systems of measurement of diverse parameters that measure the state of the lubricante have evolved a lot in the last times. Nowadays the laboratories of analysis of oils are able to supply information on physical parameters and chemists that allow to know, to the equal that the analytical of blood in the people, his general state of health and diagnose possible failures of operation... [+]

A new sensor diagnoses failures in would scheme industrial by the sound

26/03/2014
Editorial Interempresas
Picture of A new sensor diagnoses failures in would scheme industrial by the sound
Researchers of the Polytechnical University of Catalonia (UPC) have developed able wireless sensors to detect minimum fissures in industrial machinery by the ultrasonic waves that issue, what allows to locate the failure with anticipation before it produce a grave failure. The team is studying to apply the innovation in biomedicine to warn osseous fractures... [+]

The external scales of the sector of goods of team achieves a historical balance of 100%

25/03/2014
Editorial Interempresas
Picture of The external scales of the sector of goods of team achieves a historical balance of 100%
The National Association of Manufacturers of Goods of Team (Sercobe) presents the figures that collect his forecasts of closing of the exercise 2013. The data come from of a survey realizar, in the months of October-December of the past year, to 140 companies of the sector. A sample whose conjoint turnover surpasses the 21.600 million euros and with a labour structure of 91.130 places of direct work... [+]

Repair and construction of machinery

17/03/2014
Nina Jareño
Picture of Repair and construction of machinery
The sector of the repair of machinery is submerged in a situation inhabitual. The economic crisis that affects to Spain from does more than five years and the requirements of the market, among others reasons, have carried to the companies to position in favour of the repair before that the purchase of new equipments... [+]
Front Company
Newsletter
I accept the
usage and registration terms

Highlighted links
  • Emaf 19 - 22 noviembre 2014