Tower filtrante Weldex FT for the aspiración of smokes of welding
14 March 2012
In the case of welding of steels highly aleados recommends the variant of team Weldex FT-230 certificate BIA W3. In comparison with the majority of existent equipment in the market, the tower filtrante Weldex FT uses the ascending thermal sensors current originated in the process of welding. This makes possible an aspiración effective and therefore the cleaning of smokes of the environingingment. The smokes of welding that rise are aspired by the top of the team entering in this, where the particles of smoke are separated by filters of permanent cartridge of high efficiency. The air filtered and clean does not escape, however, in comparison with similar team, by the top of the team, but it returns to the pavilion through the lateral exits situated in the inferior part of the same. Thanks to this the workers of the places of welding receive of continued and effective form a supply of cool air that, logically, redunda in some conditions of work clearly improved and a greater protection of his health.
With a power of 11 kW and a discharge of maximum air of 15.000 m3/h the tower filtrante Weldex FT guarantees, thanks to an innovative technology of aspiración, a process of effective cleaning in the surroundings of the worker of the metallurgical sector. Whereas the tower filtrante standard Weldex FT-150 has of a surface filtrante of 150 square metres, the variant certified BIA W3 FT 230 offer, with the same architecture and size, 230 square metres. The team is very flexible to the hour to implant it in the pavilion and supplies entirely mounted and smart for his use, so that it was in operation in the shortest term possible. It is not necessary to realise any type of costly installation of rigid driving. Only it is necessary to realise the tackled electrical and the supply of air compressesed for the cleaning of filters. The set up of the team realises by means of a new conception of integrated cheese cheese control of easy and intuitive handle. Once in course the team shows his reliability, no only by the efficiency of the aspiración and the regeneration of the environingingment, but by his operation with some levels of noise extremely low.
The air contaminated of particles of smoke that has aspired by the top of the tower filtrante drives inside the team through a separador of sparks sobradamente dimensionado which has like function retain the thickest particles that have been able to aspire as well as any eventual spark or source of ignición. Thanks to this reduces the load of the filters of cartridge and minimises the risk of a fire of the same. The separation of the fine particles achieves by means of 6 filters of cartridge of class ‘M'. These filters are continuously regenerated of the particles adhered by means of an entirely automatic system of pulses of air compressesed Jet- Presses that it works of simultaneous form with the aspiración. The dust and the thick particles like this separate collect in a wide double drawer of 100 l of capacity situated under the zone of filters. This allows a cleaning of the waste without effort and free of rests of dust.
