Tiger•tec Silver: The turning of smelting incredibly easy
The plaquitas of cut of the new generation Tiger•tec Silver ISO P guarantee a high performance in the operation of turning of steel thanks to the special combination of a new material of cutting and a new geometry. In majority of cases, the user benefits of an increase in the performance of until 75%. This jump has to mainly to the new and optimised microstructure of the coating of oxide of aluminium for the reduction of the desgate. The back mechanical treatment of the surface of cut guarantees some efforts to compressesion in the coating; countering of this way, the breaks produced in the tips of cutting.
The new plaquitas of cutting ISO K offer now all these advantages for the materials of grey smelting GG (IN-GJL), ductile smelting GG (IN-GJS) and smelting vermicular (IN-GJV) The first degrees of material of cutting that offers Walter are: the WKK10S (ISO K10) and the WKK20S (ISO K20). Both are available in combination with the universal geometry MK5. The sign of this geometry is the relation optimised of the rompevirutas and the bevel of the plaquita. On the one hand, it guarantees a work of soft cutting, and by the another, the plaquitas are able to bear cuttings interrupted, cascarillas of smelting and variations of hardness of material.
The degree WKK10S is the first election for the mechanised in dry with a maximum resistance to the wear to some high speeds of cut is particularly adapted so much for works of continuous cut like discontinuous.
As it is possible to use this degree for the mechanised hard/soft; in the case of the steels toughened with a superficial hardness from among 40 to 61 HRC, this degree provides to the user an interesting second option of application
The degree WKK20S can use of universal form, so much for mechanised dry as with refrigeration. Mechanise with cut interrupted, transversal holes or cascarillas of smelting is not any problem.
A second application of important quotation is the mechanised of steels of high resistance with a resistance to the traction of 1000-1400N/mm2. These steels require a high individual resistance to the efforts of compressesion of the material of cutting.
The key characteristic is the reliability of the process. This is thanks to the excellent properties of cut, even in conditions cambiantes of mechanised, as it is the case of the mechanised of smelting. In some cases, can find us so much with the elimination of the cascarillas of smelting as with variable conditions of hardness. The new plaquitas Tiger•tec Silver realizar the works of turning without effort, thanks to this behaviour gives us a hygiene of process in all the operations.
