This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Zoller presenta en Euromold las tendencias del mañana
ZOLLER presents the trends of tomorrow at Euromold
15/11/2007
November 15, 2007
ZOLLER will participate in the fair Euromold, in Hall 8, booth J39, which will announce its modern technology of test and measurement for cutting tools and solutions for the manufacturing of moulds and dies.
According to the company, in the manufacture of moulds it is very important that it happens not a collision, taking into account the high price of parts and machined molds. This means that great care must be taken to provide the necessary tools. Often, production should be delayed because the composition of the specified tool is not available.
At Euromold, Zoller will demonstrate a new system as a shared project: software and interface Zoller ToolScan. The Tebis software and the Zoller measuring machine are realized via interface. Tebis provides nominal tool data to Zoller. The tool to use is scan on the machine of Zoller measuring and scanned data is sent back to Tebis. The Tebis software checks the outline of the tool to its adjustment, and accepts or rejects the tools. This reduces the liability of the operator.
The advantage and benefit for the user lies in the ability of these tools with different configurations and compositions once found the risk of collision for the tool, since the simulation/collision detection is done with current data from the tool.