Aserradero NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10 NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10

Marca:  NIENKEMPER
Modelo:  VBS 16 mit Blockwagen Typ BWH 10
Descripción: 
General Overhauled Log Band Saw NIENKEMPER VBS 16 with Log Carriage Type BWH 10 Sawmill / Vertical Log Band Saw

- Nienkemper bandsaw VBS 16 with block carriage BWH 10 was fully overhauled between 2017 and 2018. The overhaul had a value of approx. 110000 € of which approx. 55000 € are spare parts included (for more details see appendix),

- Round timber cross conveyor 5 strands up to 11 m long timber (incl. lifting legs)
Drive shafts for transport chains as well as transport chains for the cross conveyor no longer available, lifting leg equipped with chains and with 3 hydraulic lifting cylinders,
(loading dimensions [mm] approx. 7000 x 2400 x 2500, weight [kg] approx. 6000),

- Nienkemper band saw VBS 16 / general overhauled
the frame for the rollers and the saw blade is completely overhauled (frame, shafts, bearings, electrics or wiring),
the diameter of the roller for the saw blade is approx. 1600 mm, the width of the mounting surfaces is approx. 200 mm and resharpened, the shafts and bearings have also been reworked,
belt pulley diameter approx. 800 mm, mounting surfaces approx. 230 mm wide and resharpened,
frame with two edgers and exhaust for mounting on the band saw, saw blade diameter approx. 500 mm, length of the adjusting shaft approx. 2350 mm, 4 actuator (2 for adjustment in Z-direction, 2 for adjustment in Y-direction),
(Loading dimensions [mm] approx. 2400 x 2400 x 6000 Weight [kg] approx. 6000),

-Block Carriage BWH 10 / general overhauled
the block carriage has a turning function, otherwise the bearings, chains, collets, electrics, running surfaces and rails, feed rails and unit, etc. are fully overhauled,
loading dimension [mm] 10000 x 2400 x 2400, weight [kg] 80000),

- Track frame 24m long rebuilt by Nienkemper
(loading dimension [mm] approx. 6000 x 1800 x 1800, weight [kg] approx. 4000),

- Swing-out set-down roller conveyor 5-strand approx. 3895 mm x 7100 mm
(loading dimensions [mm] approx. 4000 x 7500 x 1000, weight [kg] approx. 4000),

- Roller conveyor with pull-off cross conveyor left and right approx. 1100 mm x 12350 mm
(loading dimension [mm] approx. 7000 x 2400 x 2400, weight [kg] approx. 4000),

- lowerable cross conveyor 5 strands approx. 2500 mm x 5610 mm
(loading dimension [mm] approx. 6000 x 1000 x 2500, weight [kg] approx. 3000),

- Stacking aid scissor lift table lowerable approx. 1200 mm x 7150 mm, stroke length approx. 1000 mm,
(loading dimensions [mm] approx. 7500 x 2000 x 2000, weight [kg] approx. 4000),

- Suction device for the band saw (with pipes and fan),

- Log band saw is already dismantled
Localización:  Goldenstedt
País:  Alemania
Estado:  Segunda mano
Actualizado:  17/10/2019 12:14:28
Referencia cliente:  501609
Aserradero NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10Aserradero NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10Aserradero NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10Aserradero NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10Aserradero NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10
  +49‑211‑4227370   

Introduzca aquí sus datos para contactar con el anunciante

Mensaje al anunciante

 Marcar todos
 Autorizo el envío de newsletters y avisos informativos personalizados de interempresas.net.
 Autorizo el envío de comunicaciones de terceros vía interempresas.net
 He leído y acepto el Aviso Legal y la Política de Protección de Datos.

Previous Next
Cargando...
Doing business in Spain? Interempresas Media is the key
  1. Madera
  2. Aserraderos | Segunda mano Aserradero NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10 NIENKEMPER VBS 16 mit Blockwagen Typ BWH 10 usado en venta

.
resultados

Marca
braun + canali / möhringer / nicholson
Modelo
BBS.V 1800 K/R
País
Alemania
Año
Descripción
Professional and technically well-groomed Braun + Canali BBS.V 1800 K/R double band saw and other machines for solid wood parquet production. Machine installation and technical data: Pos. 1 Round Log Yard and sawmill AUMUND bridge crane system, year 1978 Load capacity 2 x 4 to and roundwood grabs MÖHRINGER Round Log Yard Round timber entrance dimensions Length approx. 3,000 - 14,000 m Round timber entrance dimensions Diameter approx. 250 - 1,100 mm Round timber exit dimensions Length approx. 3,000 - 5,500 m Round timber output dimensions diameter approx. 250 - 1,000 mm JORO sonar material surveying system HOLTEC ES 121 crosscut sword saw, year 2000 BZ BALJER - ZEMBROD WRP-QS root reducer, year 2006 NICHOLSON 44 A6 Debarker, year 1999 S+S Lignum-HX 1600/350/16 metal detector round timber, year 2010 HAMBERGER JE TL trunk measurement, year 2004 HOLTEC HMRS 800/8 m Splinter search tape Braun + Canali B2H Block- / Tensioning trolley Wire drive with frequency controlled 75 KW motor Clamping blocks 4 pieces Trunk diameter approx. max. 1.400 mm Trunk weight approx. max. 9,000 kg Carriage speed approx. 4 - 200 m/min. Average feed speed approx. 30 m/min LINCK V40 ZD „1“ Chipper Braun + Canali BBS.V 1800 K/R Double band saw, year 1999 Roll diameter each approx. 1.800 mm Roll width each approx. 280 mm Motor each approx. 125 KW Saw blade speed per blade approx. 28 m/sec Hydraulic blade tensioning Machine weight approx. 14.000 kg Board goods Removal and transfer system Pos. 2 Solid wood Parquet production Material feed system REINHARDT NC 810 H Under table crosscut saw 1 piece Transport device REINHARDT NC 810 Cross cut saws 2 pieces Transport device Input length approx. max. 5.500 mm Input length approx. min. 2.500 mm before pre-cropping Input length approx. min. 865 mm after pre-cropping Thicknesses approx. 28, 34, 80 and 90 mm (mainly 80 mm) Width approx. max. 500 mm Output length at NC 810 approx. 2.400 mm for plank Output length at NC 810 approx. max. 1,595 mm with triple length strip parquet 525 Output length at NC 810 approx. min. 865 mm for double length strip parquet 425 MÖHRINGER Autojet MS 120 Trimming saw, year 1999 Measuring section and conveyor system MÖHRINGER Cross-cut and transversal Cross-cut saws for friezes cut to size PAUL 15 AOB Under table crosscut saw (single standing) RAIMANN ProfiRip KR 610 6M Multi-blade saw, year 2007 Tool diameter approx. 250 / 300 mm HEISS Z 2 Typ 551 Centrifuge, year 1998 Sorting line and 2 stacking units RUDNICK + ENNERS VRT 6.000 x 5.500 mm Vibro-table SARTORIUS MDB – D 65x50 Metal detector, year 2008 VECOPLAN VTH 55/25/5 Drum Chipper, year 2007 Pos. 3 Sharpening shop for saw blades etc. VOLLMER GPA 10 U Stelliting machine, year 1992 VOLLMER RC 100 Straightening machine for band saw blades, year 2000 VOLLMER CA 200 Sharpening machine for band saw blades, year 2001 IDEAL BLS 320 welding station VOLLMER VRB I Richtbank für Bandsägeblätter, year 1992 VOLLMER CAS Tandem sharpening machine for band saw blades VOLLMER CE 20 H Sharpening machine for circular saw blades, year 1992Dimensiones: 1 x 1 x 1 mmEstado: funcionandoCondiciones de entrega: desde el basamento, sin embalaranuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

Marca
möhringer
Modelo
700/75
País
España
Año
2015
Descripción
Línea de aserrado de MÖHRINGER Número de serie 144.001.58 Longitud de troncos de 2100 a 2500 m Diámetro de los troncos de 150 a 450 mm COMPOSICIÓN Transportador transversal de troncos con 2 cadenas de arrastre • Potencai del motor de arrastre 7,5 kW Sistema de introducción rápida de troncos • Longitud de tronco máximo 2600 mm • Longitud de tronco mínimo 2400 mm • Diámetro de los troncos de 200 a 750 mm • Movimiento basculante hidráulico de los rodillos Sierra alternativa IFRAME 700/75 • Anchura máxima de corte 750 mm • Altura máxima de corte 750 mm • Longitud de tronco máximo 2600 mm • Longitud de tronco mínimo 2400 mm • Longitud de tabla máximo 2600 mm • Longitud de tabla mínimo 1500 mm • Recorrido 700 mm • Avance eléctrico reglado por variador de frecuencia • Control PLC con touch panel con parámetros a ajustar por el cliente • Número máximo de hojas: 15 • Potencia del motor 140 kW • Curva máxima del tronco: 5% / m • Diámetro de la polea: 1200 mm • Anchura de la polea: 200 mm Separador de cuchillas SK73 • Apertura mínima de las placas 80 mm • Apertura máxima de las placas 600mm • Diámetro de los rodillos 300 mm Mesa con rodillos RO • Longitud de la mesa 5000 mm • Anchura de los rodillos 1200 mm • Distancia entre rodillos 800 mm Transportador evacuador QFA • Distancia entre cadenas 1200 mm • Potencia 2,2 kW • Para transporte de tablones Transportador transversal de tablas • Distancia entre ejes 5000 mm • Potencia 4 kW • Para transporte de tablones y costeros Transportador transversal de 90º • Distancia entre ejes 3000 mm • Potencia 4 kW • Para transporte de tablones y costeros Transportador curvado QFDG • Dispone de mesa de rodillos para alinear los tablones • Transportador transversal • Potencia del motor 5,5 kW • Inclinación de 60º Transportador de almacén • Distancia entre ejes 2500 mm • Para transporte de tablas Canteadora AUTOJET • Canteadora míltiple con escáner de Láser • Altura de corte mínima 18 mm • Altura de corte máxima 32 mm • Anchura de corte 32 mm • Longitud de madera máxima 2500 mm • Tipo de madera: Pino • Velocidad de alimentacíón máxima: 180 m/min • Potencia del motor 75 kW • Dispone de 7 láseres superiores e inferiores de medición • 3 grupos de sierras móviles Sierra múltiple para corte de listones • Ajustable automáticamente en función de cada una de las piezas • 5 discos de corte Transfer de salida y almacén inteligente • Almacén con 4 niveles para almacenamiento de listones en función del grosor de los mismos Normativa CE Desmontaje por la casa MöhringerDimensiones: 55000 x 10000 x 4000 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónanuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

Marca
esterer
Modelo
País
Austria
Año
Descripción
The Round Timber Cutting Plant consists of the following components: Long Wood Feeding Unit (16): Roller conveyor, length approx. 6100 mm, 6 transport rollers, width approx. 800 mm, transport belt with transport carpet, 1 roller at the beginning, width approx. 800 mm, carpet length approx. 10300 mm, width approx. 700 mm, total length transport belt approx. 11500 mm. Round Timber Feeding Unit (17): Main table support width approx. 5100 mm, depth approx. 6400 mm, 4 conveyor passages, support table 2 width approx. 5100 mm, depth approx. 1500 mm, 4 conveyor passages. Weiss Trunk Clamping Trolley (18): Rail edge outer dimensions 1000 mm, rail length approx. 17400 mm, year of construction 1975. Esterer Aver 160 Saw Gate (19): Stroke approx. 700 mm, feed speed approx. 20 m/min., passage width approx. 750 mm, year of construction 1975. Prism Conveyor (20): Left long conveyor, conveying length approx. 20000 mm, approx. 22 rollers, width approx. 1400 mm, conveyor right short, conveying length approx. 14400 mm, approx. 19 rollers, width approx. 1800 mm, installation surface approx. 24600 x 4800 mm. Springer Round Timber Feeding Unit (21): Conveyor 1 width approx. 5100 mm, depth approx. 5100 mm, 4 conveyor passages, conveyor 2 width approx. 5300 mm, depth approx. 1400 mm, 4 conveyor passages. Weiss Trunk Clamping Trolley (22): Outer rail edge approx. 1000 mm, rail length approx. 12000 mm, year of construction 1976. ESTERER DV-5 S Automatic Trimmer/Multi-Cut-Saw consists of the following components: Infeed unit ESTERER VET-S, YOM 1980, chain length approx. 6600 mm, chain width approx. 80 mm, system length approx. 7500 mm, automatic trimmer/multi-blade-saw ESTERER DKV-5 S, saw spindle speed 4300 rpm, feed max. 60 m/min., passage height approx. 160 mm, outfeed unit ESTERER, band length approx. 7600 mm, band width approx. 80 mm, total length approx. 8000 mm, total length system approx. 16500 mm ESTERER DKV 4A P/SP Recut Circular Saw/Mult-Cut-Saw with Conveyors consists of the following components: Wood Rinds Conveyor (27): Roller conveyor, length approx. 7900 mm, approx. 15 driven rollers, width approx. 520 mm, 1 roller width 500 mm, 1 transport belt with rubber carpet, length approx. 14900 mm, width approx. 500 mm, total length system approx. 21000 mm ESTERER DKV 4A P/SP Recut Circular Saw/Multi-Cut-Saw (28): Longitudinal roller conveyor, length approx. 11400 mm, approx. 11 rollers, width approx. 800 mm, cross conveyor, width approx. 5000 mm, depth approx. 1900 mm, 5 conveyor passages, mitre saw ESTERER HKS/U, YOM 1971, saw blade diameter approx. 450 mm, support surface approx. 790 x 840 mm, roller conveyor at the right side of the saw, length approx. 1950 mm, 3 rollers, width approx. 500 mm, longitudinal conveyor at the left side of the saw, length approx. 3460 mm, 4 rollers, width approx. 600 mm, multi-cut saw ESTERER DKV-4A P/SP, YOM 1984, saw spindle speed 3000 rpm, feed max. 60 m/min, passage height approx. 160 mm, passage width approx. 600 mm, operating panel longitudinal conveyor behind the main machine, length approx. 7000 mm, 13 rollers, width approx. 1050 mm, cross conveyor, width approx. 6250 mm, 5 conveyor passages, depth under longitudinal conveyor 1800 mm, depth in slope area approx. 2500 mm, longitudinal conveyor in exterior area, length approx. 9000 mm, approx. 14 Rollen, width approx. 900 mm SPRINGER Cross - Cut - System with Longitudinal and Cross Conveyor consists of the following components: Longitudinal conveyor, length approx. 2900 mm, 4 transport rollers, width approx. 1800 mm, cross conveyor, 4 conveyor passages, conveying width approx. 4300 mm, depth approx. 5200 mm (including left and right roller conveyors), cross conveyor, width approx. 6000 mm, 5200 mm (including roller conveyor), cross-cut system 1, support width approx. 8700 mm, depth approx. 2000 mm, 2 saw cross-cut units, longitudinal conveyor with cross conveyor unit, length approx. 13700 mm, approx. 28 rollers, width approx. 800 mm, cross conveyor at the end of the longitudinal conveying unit, length approx. 4700 mm, 5 conveying lines, width approx. 1200 mm, roller transfer with 6 roller conveyors, width approx. 4300 mm, depth approx. 1050 mm; cross-cut system 2, width approx. 7600 mm, 1 saw cross-cut unit, support depth approx. 8800 mmDimensiones: 1 x 1 x 1 mmEstado: sin comprobarCondiciones de entrega: desde el basamento, sin embalaranuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

Marca
nienkemper
Modelo
VBS 16 mit Blockwagen Typ BWH 10
País
Alemania
Año
Descripción
General Overhauled Log Band Saw NIENKEMPER VBS 16 with Log Carriage Type BWH 10 Sawmill / Vertical Log Band Saw - Nienkemper bandsaw VBS 16 with block carriage BWH 10 was fully overhauled between 2017 and 2018. The overhaul had a value of approx. 110000 € of which approx. 55000 € are spare parts included (for more details see appendix), - Round timber cross conveyor 5 strands up to 11 m long timber (incl. lifting legs) Drive shafts for transport chains as well as transport chains for the cross conveyor no longer available, lifting leg equipped with chains and with 3 hydraulic lifting cylinders, (loading dimensions [mm] approx. 7000 x 2400 x 2500, weight [kg] approx. 6000), - Nienkemper band saw VBS 16 / general overhauled the frame for the rollers and the saw blade is completely overhauled (frame, shafts, bearings, electrics or wiring), the diameter of the roller for the saw blade is approx. 1600 mm, the width of the mounting surfaces is approx. 200 mm and resharpened, the shafts and bearings have also been reworked, belt pulley diameter approx. 800 mm, mounting surfaces approx. 230 mm wide and resharpened, frame with two edgers and exhaust for mounting on the band saw, saw blade diameter approx. 500 mm, length of the adjusting shaft approx. 2350 mm, 4 actuator (2 for adjustment in Z-direction, 2 for adjustment in Y-direction), (Loading dimensions [mm] approx. 2400 x 2400 x 6000 Weight [kg] approx. 6000), -Block Carriage BWH 10 / general overhauled the block carriage has a turning function, otherwise the bearings, chains, collets, electrics, running surfaces and rails, feed rails and unit, etc. are fully overhauled, loading dimension [mm] 10000 x 2400 x 2400, weight [kg] 80000), - Track frame 24m long rebuilt by Nienkemper (loading dimension [mm] approx. 6000 x 1800 x 1800, weight [kg] approx. 4000), - Swing-out set-down roller conveyor 5-strand approx. 3895 mm x 7100 mm (loading dimensions [mm] approx. 4000 x 7500 x 1000, weight [kg] approx. 4000), - Roller conveyor with pull-off cross conveyor left and right approx. 1100 mm x 12350 mm (loading dimension [mm] approx. 7000 x 2400 x 2400, weight [kg] approx. 4000), - lowerable cross conveyor 5 strands approx. 2500 mm x 5610 mm (loading dimension [mm] approx. 6000 x 1000 x 2500, weight [kg] approx. 3000), - Stacking aid scissor lift table lowerable approx. 1200 mm x 7150 mm, stroke length approx. 1000 mm, (loading dimensions [mm] approx. 7500 x 2000 x 2000, weight [kg] approx. 4000), - Suction device for the band saw (with pipes and fan), - Log band saw is already dismantledDimensiones: 81600 x 2400 x 3900 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónanuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

tromel movil {{favorit}}

Marca
doppstadt
Modelo
sm610
País
España
Año
Descripción
tromel movil 6000 x 1800 de diametro para finos posibilidad de canbio de tambor a gusto del cliente marca OPPSTADT
47 EUR

Categorías (epígrafes)

    Marcas

      Países

        Precio

        Años

        Seleccione los productos sobre los que desea información y pulse este botón