2oTrimestre12 | PROTECCIÓN LABORAL 71 Updated products Mask Model 731 ·Mask Model 762-S According to EN 140, this mask is equipped with a filter that is connected by a bayonet system and two lateral exhalation valves. Made of silicone, it includes a holding harness and adjustable neck band. Compatible with Climax filters, model 757 for gases, vapors or particles. Model 755 Certified to EN 140, this semi-mask is made of rubber, it carries two replace- able filters and has got an adjustable elastic fastening with straps. Compatible with Climax filters, model 755 and 756, for gases, particles and combined. ·Model 756 Semi-mask that meets the requirements of EN 140, and it’s made of rubber. It car- ries two replaceable filters. Fastening by means of a head harness and a neck band. It’s compatible with Climax filters, model 757 and 756, for gases, particles and combined. ·Model 761 Semi-mask certified to EN 140 standard, made of rubber, which carries two replaceable filters, with fastening system by means of a head harness and a neck band. Compatible with Climax filters, model 760, chemicals and particles. ·Mask Model 731 - R (Rubber) and 731 - S (silicone) With a panoramic, scratch resistant, poly- carbonate visor, these masks are designed to be used in environments where Climax filters are required for gases, particles, combined or special. It also has got an inner half-mask built-in, made of thermoplastic rubber, and carries a fastening harness with five attachment points for improved handling. ·Mask Model 732 The body is made of silicone and it incor- porates a panoramic polycarbonate visor resistant to scratching. This mask is com- patible with the Climax chemical filters against particles and combined ones. 13 PARA MÁS INFORMACIÓN, CONTACTE CON: comercial@prensa-tecnica.com PARA MÁS INFORMACIÓN, CONTACTE CON: comercial@prensa-tecnica.com