FY73 - Futur Energy

Eólica | Wind Power cuando exista radiación solar e incluso -en una eventual fase posterior del proyecto-, en ausencia de sol mediante el uso de un sistema de almacenamiento en baterías, lo que redundará en todo caso en una mejora de la producción neta aportada a la red. Los paneles orgánicos van conectados a dos inversores que transforman la corriente continua en corriente alterna, para su conexión posterior a la red que alimenta los equipos eléctricos del aerogenerador. Todo el sistema está monitorizado al objeto de poder evaluar la solución adoptada en condiciones reales, tanto desde el punto de vista de la producción energética como de la degradación de los paneles solares. Conceptualmente, supone una configuración muy novedosa con respecto a las experiencias existentes de hibridación eólico-fotovoltaica, basadas en la instalación de paneles en suelo. La iniciativa se enmarca en un proyecto de innovación de más amplio alcance impulsado por Acciona para estudiar diversas tecnologías fotovoltaicas emergentes, con el fin de ser pionera en adoptar las soluciones más eficientes en cada caso y consolidar su liderazgo como promotor fotovoltaico, con más de 1.200 MWp operativos o en construcción en diversas regiones del mundo. Paneles solares orgánicos de uso doméstico Aunque por ahora no van a reemplazar a los módulos solares de silicio en aplicaciones industriales, los paneles orgánicos podrían tener interesantes aplicaciones domésticas, especialmente a efectos de las tecnologías IoT. Un ejemplo de ello es el reciente anuncio de la Comisión Francesa de Energías Alternativas y Energía Atómica. El organismo galo ha anunciado los resultados de una investigación en colaboración con la empresa japonesa Toyoba: un panel orgánico con una tasa de conversión del 25% en una habitación oscura con una iluminación de neón de 220 lux. Esta eficiencia es un 60% superior a la de las células fotovoltaicas de silicio amorfas que suelen emplearse en las calculadoras solares de bolsillo. La empresa japonesa ha desarrollado un material soluble capaz de generar energía por medio de una tecnología de síntesis orgánica. Así, se puede disolver con gran facilidad y aplicar uniformemente a un sustrato. Estas nuevas células fotovoltaicas pueden funcionar allá donde las tradicionales no son capaces y alimentar así dispositivos domésticos en habitaciones escasamente iluminadas con independencia de la red eléctrica. Optimising generation The immediate application of the Breña project is to produce part of the energy required by the internal systems of the wind turbine.When the turbine is running, some of the energy generated is used to power the auxiliary systems. During stoppages, certain systems need to continue working, so these are fed from the grid, which means that the wind turbine is registering a net consumption of energy. The new PV system with solar cells attached to the tower will be able to cover all or part of this demand inherent to turbine operation, when there is solar radiation and even, in a possible later phase of the project, when the sun is not shining. This would be done through a battery storage system, leading to an improvement in the net production sent to the grid. The organic cells are connected to two inverters that convert DC into AC, for later connection to the grid that supplies the electrical equipment of the wind turbine. The entire system is monitored in order to evaluate the solution adopted under real conditions, from both from the point of view of energy production and that of the degradation of the solar cells. Conceptually, this is a very innovative design compared to previous experiences in wind power-PV hybridisation, based on the installation of ground-mounted panels. The initiative is part of a wide-ranging innovation project driven by Acciona to study a number of emerging PV technologies, with the aim of pioneering the uptake of the most efficient solutions in each case, as well as consolidating its leadership as a PV developer. The company currently has over 1,200 MWp in operation or under construction in different parts of the world. Organic solar cells for domestic use Although silicon solar modules are not going to be replaced today in industrial applications, organic panels could be interesting for domestic applications, particularly in the field of IoT technologies. One such example is the recent announcement by France’s Alternative Energies and Atomic Energy Commission. This organisation has announced the results of a research work undertaken in collaboration with Japan’s Toyoba: an organic cell achieved a 25% conversion efficiency rate in a dark room under neon lighting of 220 lux. This efficiency is 60% higher than that of amorphous silicon solar cells, which are commonly used for pocket calculators. The Japanese company has developed a soluble material able to generate energy by means of an organic synthesis technology. As such, it can dissolve easily and be uniformly applied to a substrate. These new photovoltaic cells can operate in places where traditional panels cannot, and thus power domestic devices in rooms with low lighting, independently to the mains grid. FuturEnergy | Septiembre/Octubre September/October 2020 www.futurenergyweb.es 41

RkJQdWJsaXNoZXIy Njg1MjYx