Cargando...
Doing business in Spain? Interempresas Media is the key
  1. Ferretería
  2. Ingleteadoras

Venta de ingleteadoras de segunda mano, ingleteadoras nuev@s y de ocasión, de las principales marcas (Omga, Legna, Essepigi, Perris, Rapid, etc.). Encuentre su oferta y contacte con el vendedor.
resultados

Marca
omga
Modelo
MEC 300 ST
País
Italia
Año
1999
Descripción
Ø blade 300 mm, power supply 380 V, with audio support benchDimensiones: 1600 x 700 x 1700 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónFinal de la subasta: 05/08/2020 10:40 MEZEste artículo se vende exclusivamente por medio de un mecanismo de subasta en anuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

Marca
essepigi
Modelo
RAPID 3000
País
Italia
Año
1999
Descripción
Min. machinable length 170 mm Maximum machinable length 3200 mm HORIZONTAL BORE DEVICE UNITS 1 No. spindles : 5 Motor power : 2.2 KW rpm : 2200 RPM HORIZONTAL BORE DEVICE UNITS 2 No. spindles : 5 Motor power : 2.2 KW rpm : 2200 RPM Blade units 2 Maximum blade tilting : 55 gradi max. tool diameter : 450 mm Motor power : 3 KW rpm : 2000 RPM Scoring unit max. tool diameter : 120 mmDimensiones: 4800 x 2200 x 1800 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónFinal de la subasta: 22/07/2020 11:21 MEZEste artículo se vende exclusivamente por medio de un mecanismo de subasta en anuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

OMGA Miter saw {{favorit}}

Marca
omga
Modelo
País
Italia
Año
Descripción
Miter saw, blade diameter 300 mm, 2.5 hp motor, voltage 380 VDimensiones: 700 x 700 x 700 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónFinal de la subasta: 13/07/2020 11:33 MEZEste artículo se vende exclusivamente por medio de un mecanismo de subasta en anuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

Marca
barberan
Modelo
PCL 100/300
País
Italia
Año
1996
Descripción
Cutting Size 250-3000 mm, blade diameter 300 mmDimensiones: 5600 x 1100 x 1900 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónFinal de la subasta: 13/07/2020 10:13 MEZEste artículo se vende exclusivamente por medio de un mecanismo de subasta en anuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

Marca
rapid
Modelo
SGS 1238
País
Alemania
Año
1990
Descripción
For mitre cuts in aluminium and plastic profiles up to 30 With convenient and profitable electronic Displays for angle and position Product features: - Swivel range from 30° left to 30° right - precise hard chrome-plated unit double shaft- guided tour - Stable basic construction for high precision with long mitre cuts The SGS with its extremely high cutting precision is specially designed for special construction. Conditionally due to the fixed pivot point, any Angle correction over the entire swivel range. Standard equipment: - Cover against flying chips. - Swivel device with fixed locking positions - Rubber covered vertical clamps, in height and laterally adjustable. - safe two-hand operation - Saw blade approx. 430 mm Additional equipment: - hydropneumatic saw feed - horizontal tensioning device - Roller conveyor on infeed side, left as standard roller conveyor left approx. 2000 mm Measuring roller conveyor right approx. 3000 mm Technical data: Drive 2,2 kW three-phase motor, 400 Volt, shaft diameter 30 mm Manual swivel range, 30° left, 30° right Saw stroke pneumatic Sequential control for profile clamping and saw stroke Material clamping vertical pneumatic, horizontal pneumatic clamping device Suction connection 120 mm diameter Air pressure 7 bar, 100 litres/minDimensiones: 3500 x 2000 x 1500 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónFinal de la subasta: 21/07/2020 11:19 MEZEste artículo se vende exclusivamente por medio de un mecanismo de subasta en anuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

Marca
reinhardt
Modelo
VARIO LINE NC 1
País
Alemania
Año
2002
Descripción
- Handheld measuring trolley - Optimization computer type CONTROL 5.0 Module 5.06 - Conveyor belt type FB 150 - Cross transport RQT 1000 - 8 - High performance crosscut saw type NC 110 - Outfeed conveyor belt FB 150 with length sorting - Electrical control Colour: night blue / water blue Pos. 1: Hand measuring trolley ********************* in lightweight construction, can be moved by hand. With marking of workpiece start, end, defects and quality changes via keystroke. The operation takes place from a sliding Control panel off. * Control panel with defect and quality input via button * Laser directional light as optical pointer Pos. 2: Optimization computer type CONTROL 5.0 Module 5.06 ******************************************************* * modular, powerful microprocessor system * Input terminal with input keyboard and LCD flat screen * clear and comfortable menu technology, very light to handle, no IT knowledge required * Storage capacity for 300 different lengths, divided into 10 cutting lists Full - optimization according to priority: ------------------------------------------ * Error marking by means of laser directional light For each cutting list can be the desired priority type, as well as the permissible waste must be specified separately. The calculator prefers with: * priority length - the greater length * Priority number of pieces - the higher remaining number * Priority valuation code - the higher Valuation ratio * Priority Smallest waste - the smaller absolute Offcuts * Priority Number of units and valuation code - the result from remaining number of units x valuation code Length sorting: ----------------- The control of the automatic length sorting is done via the optimization computer. Each length is calculated by the computer of the corresponding Drop point assigned. Due to the sorting of the finished lengths the acceptance of the parts is much easier for the operator. Automatic balancing of the cutting data: --------------------------------------------- The automatic balancing of the cutting data takes place according to the wood throughput in running meters and as a percentage. The Total quantity, quantity per cutting list, remaining length and the waste specified. Furthermore, target, actual and remaining quantity as well as date, time and the net processing time is displayed for each cutting list. The machine control is fully automatic: The measuring station recognizes the total length of the workpiece and the marked Flaws. This information is processed by the optimization computer evaluated and passed on to the saw control. The optimal The desired lengths are divided from the cutting lists in the light of the priorities set. The workpieces are cut on the crosscut saw according to the calculated Cutting program divided up while other workpieces are already be measured and optimized. Positions, which are processed (number of pieces reached) are automatically no longer tailored. The status of the processing can be called up on the screen at any time apparent. The balance sheet data can be displayed for a variety of calculation and control purposes. (payroll accounting, quality control, purchasing of materials, etc.) Diagnostic functions ------------------ In the event of a fault, a message appears directly on the screen with the cause of the malfunction. In addition, the computer automatically records the last 100 machine states. Extensive diagnostic functions are available for this purpose. This data can be called up at any time and traced backwards will be. Additional module data transmission with REIAV program ----------------------------------------------- The control computer is equipped with a data transfer card which enables data exchange between the system and the office PC. With the Reinhardt work preparation program you can easily create cutting orders in the office on the PC or changed and later transferred to the machine via data transmission can be loaded. The input is similar to that on the machine. The balance sheets can also be read out from the machine. Remote modem diagnosis / remote modem maintenance ------------------------------------ In the event of a fault, the diagnostic information of the machine can be and evaluated by specialist personnel from Reinhardt will be. In addition, parameters and machine data can be checked or be changed or adapted. There is an analog, shielded telephone connection if possible with TAE connection socket directly next to or in the switch cabinet of the machine. The connection must have full authority. This means that it must be connected directly from outside via a unique telephone number and you must be reachable from the telephone connection on the machine can establish a direct connection to the Reinhardt company. Please note that the telephone line must be routed from power lines are laid separately. Pos. 3: Conveyor belt type FB 150 ****************************** Belt frame made of solid walls with sliding floor in box construction edged and welded, belt upper run as sanding belt on Sheet surface sliding guided, drive and reversing roller ball bearing mounted, tensioning station on the reversing roller. Technical data: transport length 8.000 mm Belt width 150 mm incl. 1 storage place for marking the workpieces by the operator Pos. 4+5: Cross transport RQT 1000 - 8 ************************************ As cross conveyor between planer and crosscut saw consisting of 8 chain strands, base in welded construction, Chains are guided on the upper side on mounting rails, Transport chain with straight chain plates, drive- and deflection stations on ball bearings. Chains with driving cams, gaps lined with metal sheets on which the workpieces slide. Technical data: centre distance 3.000 mm transport width 7.000 mm Pos. 6: Conveyor belt type FB 150 ***************************** Belt frame made of solid walls with sliding floor in box construction edged and welded, belt upper run as sanding belt on Sheet surface sliding guided, drive and reversing roller ball bearing mounted, tensioning station on the reversing roller. Technical data: transport length 8.000 mm Belt width 150 mm Pos. 7: High performance crosscut saw type NC 110 - Working from left to right ********************************************** for fast, automated processing of trimmed Workpieces, pneumatically controlled, in stable steel construction. * electronically positioning feed unit with automatic height adjustment with each new workpiece * PU feed rollers * Saw blade * Saw blade feed infinitely variable * replaceable wear bar in the saw blade area * Waste disposal directly at the saw blade * Waste chute locked and secured * Socket for chip extraction * complete compressed air preparation unit * electrical equipment wired for 380 V, 50 Hz, Cutting areas (see also cutting diagrams): Cutting height max. 80 mm Cutting depth max. 200 mm Technical data: Saw unit: Saw blade Z 144 500x30x4 mm Speed 2,800 rpm Cutting time per stroke 0.2-3 s Drive power 5,5 KW Compressed air requirement 6 bar Suction socket 1 x * 125 mm Suction speed 25 m/s Feed unit: Electr. controlled three-phase servo drive Feed speed max. 180 m/min Acceleration/deceleration 25 m/s2 Drive power 3,5 kW Positioning accuracy * 1 mm/m Number of driven rollers 6 pieces Working height (standard) 900 mm External dimensions (L x W x H) 1,100 x 1,100 x 1,500 mm Pos. 8: Outfeed conveyor belt FB 150 with length sorting ****************************************************** with 10 pneumatic ejectors type BFE, on a stable guide separately guided. The triggering is automatic via the machine control system. * Drive and deflection roller mounted in ball bearings * Tensioning station on the reversing roller * conveyor belt with guide Technical data: transport length 15.000 mm Belt width 150 mm Incl. 10 additional contacts for later control from box 11-20 Item 9: Electrical control of the scope of delivery *********************************************** Electrical equipment with all necessary switching devices, ready for mains connection according to VDE 0113 for one operating voltage from 400 Volt three-phase current and 230 V alternating current - 50 Hz wiredDimensiones: 6000 x 2500 x 2500 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónFinal de la subasta: 21/07/2020 11:35 MEZEste artículo se vende exclusivamente por medio de un mecanismo de subasta en anuncio en web de Surplex (más información)anuncio en web de Surplex (más información) ... Leer más
EUR

Marca
perris
Modelo
300
País
Alemania
Año
Descripción
table 580 x 290 mm, 45° swivelling and rotatable 380 V, saw blade diameter max. 340 mmm, without saw bladeDimensiones: 1000 x 1000 x 1100 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónanuncio en web de Surplex (más información)anuncio en web de Surplex (más información)
EUR

Marca
elu
Modelo
MGS 72
País
Alemania
Año
Descripción
2000 W, 2.7 HP, 3800 rpm, machine number 8479, swivelling, table approx. 660 x 220 mm, on base tableDimensiones: 1000 x 800 x 1700 mmEstado: sin comprobarCondiciones de entrega: cargado en camiónanuncio en web de Surplex (más información)anuncio en web de Surplex (más información)
EUR

Marca
virutex
Modelo
TM33L
País
España
Año
Descripción
Ref. 84M17 Tronzadora-Ingletadora abatible portátil VIRUTEX mod. TM33L de gran precisión y potencia. Estado: Sin usar – Nueva. Capacidad de corte: hasta 160 x 95 mm. ó 200 x 45 mm. con plato y cabezal a 0°. Cabezal abatible de 0° a 45°. Equipada con mesa superior. Sistema de seguridad integral. Dotada de freno del disco y seguro contra arranques accidentales por corte del suministro eléctrico. Doble transmisión por correas dentadas muy silenciosa. Incorpora un botón de bloqueo, para facilitar el cambio del disco sierra. Conexión para aspiración externa. Equipada con disco de metal duro 48 dientes de diámetro 300 mm. ... Leer más
EUR

Ingleteadora a pedal {{favorit}}

Marca
legna
Modelo
País
España
Año
Descripción
Para marqueteria
EUR

Ingleteadora a pedal {{favorit}}

Marca
legna
Modelo
País
España
Año
Descripción
Para marqueteria
EUR

Ingletadora doble {{favorit}}

Marca
omga
Modelo
2tra
País
España
Año
2003
Descripción
Dispongo ingletadora doble Omga posicionamiento motor automatico
EUR

Radial ingletadora {{favorit}}

Marca
omga
Modelo
RN 350
País
España
Año
Descripción
640 EUR

Categorías (epígrafes)

    Marcas

      Países

        Precio

        Años

        Seleccione los productos sobre los que desea información y pulse este botón