Hispalyt Receives a technical day on a new free software of calculation of walls of block termoarcilla and brick

On 28 November, of 16:00 h to 18:30 h, will take place a jornada technical in the headquarters of Hispalyt and of the Consortium Termoarcilla (C/ Orense, number 10 – 2º. Of. 13-14. Madrid) and by videoconference to give to know the operation of the CMT+L, for the calculation of walls of load of brick and ceramic block. Thus Hispalyt and the Consortium Termoarcilla, Spanish Associations of Manufacturers of Bricks and Blocks Termoarcilla, have developed, in collaboration with Arktec, the new CMT+L, a free software that allows to calculate walls of load of termoarcilla and of brick, offering technical solutions like the calculation of typologies, efforts by means of finite elements, and other a lot of, all this according to the requirements demanded by the CTE in his section DB--F.

The bricks drilled and the block termoarcilla allow the construction of the structure of houses with walls of load, following the models of calculation of the current rule, Basic Document of Structural hygiene of Factory of the Technical Code of the Edificación (DB -F of the CTE). Besides, the construction of the structure of a house with walls of load of brick or ceramic block can result very advantageous, especially in the case of edificaciones in horizontal, as semi-detached, chalets or buildings of little height, by the considerable saving that produces when avoiding another type of structures of concrete or of steel.

To facilitate the work of the prescriptor in the task of the calculation of walls of load of bricks and ceramic blocks, Hispalyt and the Consortium Termoarcilla, Spanish Associations of Manufacturers of Bricks and Blocks Termoarcilla, have developed different publications and free tools, being one of them CMT+L.