News Info News

This news article was originally written in Spanish. It has been automatically translated for your convenience. Reasonable efforts have been made to provide an accurate translation, however, no automated translation is perfect nor is it intended to replace a human translator. The original article in Spanish can be viewed at Pavimentos y revestimientos Protecta para renovar suelos industriales
The multilayered solution is especially resistant to the abrasion, and pressesure, ideal for corridors of rodadura and zones of load and download

Pavimentos And coatings Protecta to renew industrial floors

Editorial Interempresas19/01/2009

19 January 2009

To base of resins epoxídicas, the multilayered Protecta with Betunit-180 and finishing with Corr-Unit 65 is a pavimento durable and of high quality. It treats of an especially resistant product to the abrasion, to the mechanical loads, to the wear by rodadura of industrial vehicles and to the chemical aggressions.

Protecta, Barcelona company specializing in the protection, repair and rehabilitation of all types of industrial, new and old soils, provides a complete service ranging from the visit and the advice from the technical to the delivery of the work in record time. The production of their solutions, in his own company, allows you to use raw materials of latest generation, a rigorous quality control and a choice of product suitable to every problem of soil.

Imagen

Composition of the pavement multi-layer Betunit

Paviento supportMilling depth--------------
RepairPuTTY-based epoxide resinsBetunit-263
PrimerEpoxide resinsSPM
Layer regularizadora and based on the multi-layerWith incorporation of silices epoxide resinsBetunit-180
FinishSealed with polyurethane and special silicesCorr-Unit-65

Pavements and Protecta multilayer coatings are suitable when required clean and resistant surfaces

The correct application of the Protecta multilayer

The excellent qualities of pavements and coverings multilayer Protecta make that they are suitable when required clean and resistant surfaces. Only a correct and thorough technique employed in the work of preparation and implementation guarantees a perfect finish. Protecta specialists have the machinery and the appropriate tools and provide the expertise and the necessary technical knowledge.

Prior to its placement, it is convenient to mechanically treat the surface of the existing land to open the pores. It continues with scanning aspirate dust and detached particle and applies the product Betunit-263 (two components) using a spatula to the patching of fissures, cracks and peeling. Setting time is 4 to 8 hours.

Then a primer with adherent based PMS is done via a roller (2 components and 4 to 8 hours of setting) to strengthen itself based on the pavement. Apply the Betunit-180 to form a regularizadora layer and spread the first special silices. Then the excess material is swept, are sanded surface and becomes to apply the Betunit-180, layer of finish (6 to 12 hours of setting). Finally, applies the Corr-Unit 65 product with a roller, turns to scatter silica and to implement the 65 Corr-Unit as a layer of sealing (8 to 12 hours of setting).

If the support is in good condition, the protection is limited to a coating multilayer Corr-Unit, consisting of the mechanical treatment of the soil, a possible timely patching of cracks and peeling, and the application of a layer of primer Corr-Unita layer of finish Corr-Unit 40, and finally a layer of sealing Corr-Unit 65.

Signage for industrial flooring, for security, organization and aesthetic requirements is done by Protecta-Duraline, avoiding rapid and premature wear.

Image of industrial soil before and after the application of the pavement multi-layer Protecta
Image of industrial soil before and after the application of the pavement multi-layer Protecta.

Regulations

Betunit-263, Betunit-18053456 DIN, DIN 52 108
Primer SPMCAS 025085-99-8
Corr-Unit 65DIN 53152

Related Companies or Entities

Protecta, S.A.

Suscríbase a nuestra Newsletter - Ver ejemplo

Password

Select all

Autorizo el envío de newsletters y avisos informativos personalizados de interempresas.net

I authorize the sending of communications from third parties via interempresas.net

He leído y acepto el Legal notice y la Data protection policy

Responsable: Interempresas Media, S.L.U. Purpose: Subscription to our newsletter(s). User account management. Sending emails related to the same or related to similar or associated interests.Retention: for the duration of the relationship with you, or as long as necessary to carry out the specified purposesTransfer: Data may be transferred to other group companies for internal management purposes.Rights: Access, rectification, opposition, deletion, portability, limitation of processing and automated decisions: contact our DPD. If you consider that the processing does not comply with the regulations in force, you may lodge a complaint with the AEPD.More information: Data protection policy

REVISTAS

VÍDEOS DESTACADOS

  • Diseñado, construido y probado por Schlüter-Systems

    Diseñado, construido y probado por Schlüter-Systems

TOP PRODUCTS

NEWSLETTERS

  • Newsletter Arquitectura y Construcción

    17/09/2024

  • Newsletter Arquitectura y Construcción

    12/09/2024

Highlighted links

CEVISAMA (24- 25 febrero, Valencia)PiscinaSpainAsefaveFeria de la Construcción (17 a 19 Octubre 2024)27&28 Noviembre IFEMA (Madrid)Matelec - IFEMAAsociación Española de Fabricantes de Fachadas Ligeras y VentanasRebuild Rehabilita - Nebext

Latest news

Featured companies

OPINIÓN

ENTIDADES COLABORADORAS

OTRAS SECCIONES

Services