Günter-Tore doors and Intec-Doors of the hand at Construmat
March 20, 2009
INTEC-Doors is dedicated to the marketing of a wide range of integrated solutions for garage doors sectional, industrial doors, sectional, rolling shutters, and stackable as well as Gates and fences of aluminium. It offers products of well-known European manufacturers always with high image quality, longevity, security, and compliance with existing regulations. In addition to the gates of aluminium Tschoeppé, the company based in Vic markets the range of the Günther-Tore brand sectional, rolling shutters or stackable doors.
Projection and construction to measure
Günther-Tore has a wide range of sectional doors domestic and industrial; roller doors with single or double wall insulated; Stackable doors with lateral or vertical opening; and sliding doors with lateral or concentric tour. The doors can be developed to measure to suit all the requirements of the work: domestic branches are built up to 6,000 millimeters wide; the sectional industrial, up 12,500 millimeters wide; the roller-single wall, up to 20,000 mm; and the roller-double wall up to 12,000 mm in width.
Only in Spain the garage ventilation function
With a simple click on the remote control allows that the upper section of the garage door Primus 100 tilt a few degrees inward enabling the renewal of air door was completely closed.
How different are the Günther-Tore products?
First of all, the door panels stand out for their quality. It's sectional panels of 45 millimeters of uniform thickness, totally closed, filled with high density expanded polyurethane with CFC-free pentane gas, 15% more thermal and acoustic insulation
Also, the aluminium profile that uses the brand is recognized by the Germany most prestigious automobile dealers. Panoramic door glass without intermediate profiles up to 3,800 millimeters wide be achieved with it. The fittings are stainless steel series, with hinges and bearing of series stainless steel housings in sectional industrial as domestic line.
Safety and regulation
All doors and automatism have been provados as a unit of operation, in all its versions and combinations, obtaining the certificate of conformity with the rules of doors UNE-EN 13241-1.